FORCED-CONVECTION ON A ROTATING CYLINDER WITH AN INCIDENT AIR-JET

Forced convection on a rotating cylinder cooled with an air jet is investigated in the present study. To properly handle the jet flow before and after hitting the cylinder, a computational domain having an irregular shape is employed. Results of streamlines, isotherms and Nusselt numbers are presented for jet Reynolds numbers of Re(j) = 100, 500 and 1000 under various rotation Reynolds numbers in the range of 0 less-than-or-equal-to Re(omega)/Re(j) less-than-or-equal-to 1. It is interesting to find two solution modes in the present problem. For small rotation speeds, the jet flow is separated into two branches upon hitting the cylinder. Each branch has a separation point. With the aid of the rotating cylinder, one of the separation points moves downstream, while the other receives little influence. Hence, the overall heat transfer is enhanced. For high rotation speeds, however, this heat transfer behavior is reversed due to a layer of dead air round the cylinder. Nevertheless, a more uniform heat transfer is achieved. For both cases of Re(j) = 500 and 1000, dual solutions according to each of the two solution modes exist in a range of rotation Reynolds numbers. Like the transition from laminar to turbulent flow, the heat transfer characteristics jump from one solution mode to the other depending on the flow instability. However, the transition between the two solution modes is not clear for a jet Reynolds number Re(j) as small as 100.