FINITE ELEMENT ANALYSIS OF THIN WALLED PRESSURE VESSELS

被引：0
作者：
Eruslu, Sait O. [1 ]
机构：
[1] Namik Kemal Univ, Corlu Muhendislik Fak, Makine Muhendisligi, TR-59860 Corlu, Tekirdag, Turkey
来源：
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI | 2008年 / 14卷 / 02期
关键词：
Thin walled pressure vessels; Burst pressure; Failure analysis;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study thin walled pressure vessels made from two different materials refered in ASTM standarts were analysed under pressure. Two and three dimensional finite element models were constructed by Ansys 9.0, three dimensional model was studied for two different designs. Failure analysis was performed with stress resultants. Burst pressures and critical areas were obtained by using maximum stress criteria. Failure resultants were compared with Von Mises yield criteria and analytical results of standarts. It was found that finite element models, design criterias and material properties are effective tools for analysis. The burst pressure results based on finite element analysis were found higher than the results of analytical solutions based on the standarts
引用
收藏
页码：169 / 174
页数：6
相关论文
共 50 条
  • [31] Development of carbon composite bike fork using finite element analysis and a new pressure molding process
    Hyunchul Ahn
    Jin-Sung Chon
    Nam-Kyoung Woo
    Jae-Gwan Kim
    Woong-Ryeol Yu
    Fibers and Polymers, 2014, 15 : 1517 - 1522
  • [32] Unified Solution of Burst Pressure for Defect-Free Thin Walled Elbows
    Li, Y.
    Zhao, J. H.
    Zhu, Q.
    Cao, X. Y.
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2015, 137 (02):
  • [33] Finite-Element Evaluation of Burst Pressure Models for Corroded Pipelines
    Mondal, Bipul Chandra
    Dhar, Ashutosh Sutra
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2017, 139 (02):
  • [34] Electrochemical Corrosion Finite Element Analysis and Burst Pressure Prediction of Externally Corroded Underground Gas Transmission Pipelines
    Gadala, Ibrahim M.
    Wahab, Magd Abdel
    Alfantazi, Akram
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2018, 140 (01):
  • [35] Optimizing structural integrity of a pressure vessel via finite element analysis and machine learning based XGBoost approaches
    Shaik, Nagoor Basha
    Aluru, Vamsi
    Jongkittinarukorn, Kittiphong
    Aluru, Prasad
    SCIENTIFIC REPORTS, 2025, 15 (01):
  • [36] Numerical prediction with finite element analysis (FEA) of burst pressure in pipelines with interacting internal & external corrosion defects
    Al Naamani, Hussain
    Al Jahwari, Farooq
    Pervez, Tasneem
    Al Owaisi, Sultan
    Al Shabibi, Abdullah
    Joshi, Sanket
    ENGINEERING RESEARCH EXPRESS, 2024, 6 (04):
  • [37] Development and analysis of composite overwrapped pressure vessels for hydrogen storage
    Kartav, Osman
    Kangal, Serkan
    Yuceturk, Kutay
    Tanoglu, Metin
    Aktas, Engin
    Artem, H. Secil
    JOURNAL OF COMPOSITE MATERIALS, 2021, 55 (28) : 4141 - 4155
  • [38] A finite element analysis of impact damage in composite laminates
    Shi, Y.
    Soutis, C.
    AERONAUTICAL JOURNAL, 2012, 116 (1186) : 1331 - 1347
  • [39] Finite element stress analysis of composite sucker rods
    Woldesenbet, E
    JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 2003, 125 (04): : 299 - 303
  • [40] Analysis of parallel groove clamp with finite element method
    Luo, GP
    Xu, LJ
    Zhang, JG
    PROCEEDINGS OF THE FORTY-SEVENTH IEEE HOLM CONFERENCE ON ELECTRICAL CONTACTS, 2001, : 230 - 238
12345