FINITE ELEMENT ANALYSIS OF THIN WALLED PRESSURE VESSELS

被引：0

作者：

Eruslu, Sait O. ^{[1
]}

机构：

[1] Namik Kemal Univ, Corlu Muhendislik Fak, Makine Muhendisligi, TR-59860 Corlu, Tekirdag, Turkey

来源：

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI | 2008年 / 14卷 / 02期

关键词：

Thin walled pressure vessels; Burst pressure; Failure analysis;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study thin walled pressure vessels made from two different materials refered in ASTM standarts were analysed under pressure. Two and three dimensional finite element models were constructed by Ansys 9.0, three dimensional model was studied for two different designs. Failure analysis was performed with stress resultants. Burst pressures and critical areas were obtained by using maximum stress criteria. Failure resultants were compared with Von Mises yield criteria and analytical results of standarts. It was found that finite element models, design criterias and material properties are effective tools for analysis. The burst pressure results based on finite element analysis were found higher than the results of analytical solutions based on the standarts

引用

页码：169 / 174

页数：6

共 21 条

[1]

[Anonymous], 2007, ENV SAF HLTH INT MAN, VII

[2]

[Anonymous], 1989, ASTM BOIL PRESS VESS

[3]

[Anonymous], 2003, TSEN19642

[4]

British Standarts Institution, 1986, BS5500

[5] Design by analysis versus design by formula of high strength steel pressure vessels: a comparative study [J].

Diamantoudis, AT ;

Kermanidis, T .

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2005, 82 (01) :43-50

[6]

Dogan T., 2006, THESIS

[7]

European Committee for Standardization, 2002, 134453 EN

[8] PLASTIC BUCKLING OF TORISPHERICAL AND ELLIPSOIDAL SHELLS SUBJECTED TO INTERNAL-PRESSURE [J].

GALLETLY, GD .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, 1981, 195 (DEC) :329-345

[9] Optimization of location and size of opening in a pressure vessel cylinder using ANSYS [J].

Hyder, M. Javed ;

Asif, M. .

ENGINEERING FAILURE ANALYSIS, 2008, 15 (1-2) :1-19

[10]

Kandaz M., 2006, THESIS

← 1 2 3 →