Dry sliding wear behavior of epoxy fly ash composite with Taguchi optimization

被引：64
作者：
Pattanaik, Ashutosh [1 ]
Satpathy, Mantra Prasad [2 ]
Mishra, Subash Chandra [1 ]
机构：
[1] Natl Inst Technol Rourkela, Dept Met & Mat Engn, Rourkela 769008, Odisha, India
[2] Natl Inst Technol Rourkela, Dept Mech Engn, Rourkela 769008, Odisha, India
来源：
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH | 2016年 / 19卷 / 02期
关键词：
Fly ash; Epoxy; Sliding wear; Taguchi philosophy;
D O I：
10.1016/j.jestch.2015.11.010
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Epoxy resin matrix composite reinforced with fly ash particles was prepared by ultrasonic stirring method. Pin-on-disc wear test of the composite was carried out and compared according to Taguchi design-of-experiment. An orthogonal array exhibited and examined the influencing parameters like % of fly ash debris, typical load, sliding speed and track distance on the composite. Signal to noise ratio analysis optimizes the parametric condition that yields minimum wear rate, minimum frictional force and minimum coefficient of friction. A multi-criteria decision analysis method, TOPSIS is used to optimize the output, and confirmation test has been done to verify the projected model. ANOVA shows that applied normal load plays a vital role in increasing dry sliding wear of epoxy composites. (C) 2016, Karabuk University. Publishing services by Elsevier B.V.
引用
收藏
页码：710 / 716
页数：7
相关论文
共 17 条
  • [1] Effect of applied load on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite
    Alidokht, S. A.
    Abdollah-Zadeh, A.
    Assadi, H.
    [J]. WEAR, 2013, 305 (1-2) : 291 - 298
  • [2] A Study on Tribological Behavior of Alumina-Filled Glass-Epoxy Composites Using Taguchi Experimental Design
    Biswas, Sandhyarani
    Satapathy, Alok
    [J]. TRIBOLOGY TRANSACTIONS, 2010, 53 (04) : 520 - 532
  • [3] Tribo-performance analysis of red mud filled glass-epoxy composites using Taguchi experimental design
    Biswas, Sandhyarani
    Satapathy, Alok
    [J]. MATERIALS & DESIGN, 2009, 30 (08) : 2841 - 2853
  • [4] MATERIALS ASPECTS OF POLYMER WEAR
    BRISCOE, BJ
    [J]. SCRIPTA METALLURGICA ET MATERIALIA, 1990, 24 (05): : 839 - 844
  • [5] Abrasive wear of aluminium composites - A review
    Deuis, RL
    Subramanian, C
    Yellup, JM
    [J]. WEAR, 1996, 201 (1-2) : 132 - 144
  • [6] Dry sliding wear behavior of heat treated hybrid metal matrix composite using Taguchi techniques
    Kiran, T. S.
    Kumar, M. Prasanna
    Basavarajappa, S.
    Viswanatha, B. M.
    [J]. MATERIALS & DESIGN, 2014, 63 : 294 - 304
  • [7] A study of sliding wear behaviors of Al-7075 alloy and Al-7075 hybrid composite by response surface methodology analysis
    Kumar, Ravinder
    Dhiman, Suresh
    [J]. MATERIALS & DESIGN, 2013, 50 : 351 - 359
  • [8] A study of the erosive wear damage on a recycled polymer coating
    Laguna-Camacho, J. R.
    Marquez-Vera, C. A.
    Patino-Valdez, A. A.
    Juarez-Morales, G.
    Hernandez-Romero, I.
    Contreras-Bermudez, R. E.
    Ortega-Aviles, M.
    Pantoja-Castro, M. A.
    [J]. WEAR, 2015, 332 : 836 - 843
  • [9] Lancaster J.K., 1972, TRIBOLOGY, V5, P249, DOI [10.1016/0041-2678(72)90103-0, DOI 10.1016/0041-2678(72)90103-0]
  • [10] Taguchi method applied to parametric appraisal of erosion behavior of GF-reinforced polyester composites
    Mahapatra, S. S.
    Patnaik, Amar
    Satapathy, Alok
    [J]. WEAR, 2008, 265 (1-2) : 214 - 222
12