MEASUREMENT OF TENSILE-STRENGTH DEVELOPMENT OF UREA FORMALDEHYDE WOOD BONDS DURING PRESSING AT ELEVATED-TEMPERATURES

被引：0
作者：
BOLTON, AJ [1 ]
HUMPHREY, PE [1 ]
机构：
[1] UNIV WALES,UNIV COLL N WALES,DEPT FORESTRY & WOOD SCI,BANGOR LL57 2UW,GWYNEDD,WALES
来源：
JOURNAL OF THE INSTITUTE OF WOOD SCIENCE | 1977年 / 7卷 / 41期
关键词：
D O I：
暂无
中图分类号：
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号：
0805 ; 080502 ; 0822 ;
摘要：
引用
收藏
页码：11 / 14
页数：4
相关论文
共 30 条
  • [21] The effect of sequential ammonia and methyl formate injection on the strength development of phenol-formaldehyde bonds to wood
    Chowdhury, MJA
    Humphrey, PE
    WOOD AND FIBER SCIENCE, 2006, 38 (02): : 351 - 358
  • [22] The effect of sequential ammonia and methyl formate injection on the strength development of phenol-formaldehyde bonds to wood
    Centre for Advanced Wood Processing, Department of Wood Science, University of British Columbia, Vancouver, BC V6T 1Z4, Canada
    不详
    不详
    Wood Fiber Sci, 2006, 2 (351-358):
  • [23] Development of High Strength, High Water Resistant, Low-Formaldehyde Emission Urea-Formaldehyde Adhesive and Its Effect on the Properties of Wood Composites
    Tian, Wei
    Feng, Hongyu
    Wang, Xiaoyi
    Wu, Weijie
    Zeng, Shiyi
    Zhu, Yaqin
    Wang, Jiangbo
    Ye, Yuhang
    Mei, Changtong
    Liu, Yuanqiang
    Lu, Lihua
    Jiang, Shaohua
    Han, Xiaoshuai
    JOURNAL OF APPLIED POLYMER SCIENCE, 2025, 142 (10)
  • [24] Fiber strength measurement for KD-I(f)/SiC composites and correlation to tensile mechanical behavior at room and elevated temperatures
    Jing Xin
    Shi Duoqi
    Yang Xiaoguang
    Zhao Chaojun
    CERAMICS INTERNATIONAL, 2015, 41 (01) : 299 - 307
  • [25] Influence of Pressing Temperatures on Physical-Mechanical Properties of Wood Particleboards Made with Urea-Formaldehyde Adhesive Containing Al2O3 and CuO Nanoparticles
    Lirya Silva, Luana Cristal
    Lima, Felipe Oliveira
    De Araujo, Victor Almeida
    Dos Santos, Herisson Ferreira
    Lahr, Francisco Antonio Rocco
    Christoforo, Andre Luis
    Favarim, Higor Rogerio
    de Campos, Cristiane Inacio
    POLYMERS, 2024, 16 (12)
  • [26] FACTORS AFFECTING THE PROGRESSIVE DEVELOPMENT OF WEAR-PROTECTIVE OXIDES ON IRON-BASE ALLOYS DURING SLIDING AT ELEVATED-TEMPERATURES
    STOTT, FH
    GLASCOTT, J
    WOOD, GC
    WEAR, 1984, 97 (01) : 93 - 106
  • [27] Tensile and shear strength for a self-drilling screw and transition of failure-modes and shear-strengths for self-drilling screwed connections at elevated-temperatures
    Ozaki, Fuminobu
    Liu, Ying
    Ye, Kai
    JOURNAL OF STRUCTURAL FIRE ENGINEERING, 2022, 13 (03) : 321 - 346
  • [28] In-situ analysis of microstress and texture development during tensile deformation of MMCs at room temperature and at elevated temperatures using synchrotron radiation
    Pyzalla, A
    Reetz, B
    Wegener, J
    Jacques, A
    Ferry, O
    Feiereisen, JP
    Buslaps, T
    ECRS 6: PROCEEDINGS OF THE 6TH EUROPEAN CONFERENCE ON RESIDUAL STRESSES, 2002, 404-7 : 535 - 540
  • [29] STRENGTH DEVELOPMENT OF 300 N/MM2 CLASS ULTRA-HIGH STRENGTH GROUT DURING HEAT CONTROLLED CURING WITH ELEVATED TEMPERATURES
    Honma D.
    Kojima M.
    Nishiwaki T.
    Mihashi H.
    Journal of Structural and Construction Engineering, 2023, 88 (810): : 1230 - 1239
  • [30] DEGRADATION OF MECHANICAL-PROPERTIES OF CAST CR-MO-V AND CR-W-V STEAM-TURBINE CASINGS AFTER LONG-TERM SERVICE AT ELEVATED-TEMPERATURES .1. TENSILE PROPERTIES, BRITTLE-FRACTURE STRENGTH AND CHARPY IMPACT PROPERTIES
    HOLZMANN, M
    MAN, J
    VLACH, B
    KRUMPOS, J
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 1994, 57 (02) : 141 - 152
123