FRICTION STIR WELDING (FSW) OF ALUMINIUM FOAM SANDWICH PANELS

被引：0

作者：

Busic, M. ^{[1
]}

Kozuh, Z. ^{[1
]}

Klobcar, D. ^{[2
]}

Samardzic, I. ^{[3
]}

机构：

[1] Univ Zagreb, Fac Mech Engn & Naval Architecture, Zagreb 41000, Croatia

[2] Univ Ljubljana, Fac Mech Engn, Ljubljana 61000, Slovenia

[3] Univ Osijek, Fac Mech Engn, Slavonski Brod, Croatia

来源：

METALURGIJA | 2016年 / 55卷 / 03期

关键词：

friction stir welding; aluminium foam; welding speed; sandwich panels; tool tilt angle;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The article focuses on the influence of welding speed and tool tilt angle upon the mechanical properties at the friction stir welding of aluminium foam sandwich panels. Double side welding was used for producing butt welds of aluminium sandwich panels applying insertion of extruded aluminium profile. Such insertion provided lower pressure of the tool upon the aluminium panels, providing also sufficient volume of the material required for the weldment formation. Ultimate tensile strength and flexural strength for three-point bending test have been determined for samples taken from the welded joints. Results have confirmed anticipated effects of independent variables.

引用

页码：473 / 476

页数：4

共 11 条

[1]

[Anonymous], C36503 ASTM

[2]

[Anonymous], 57332014 EN

[3]

[Anonymous], C39300 ASTM

[4]

[Anonymous], 2523942012 EN ISO

[5]

Ashby M.F., 2000, METAL FOAMS DESIGN G, P42

[6] On the road again: Metal foams find favor [J].

Banhart, J ;

Weaire, D .

PHYSICS TODAY, 2002, 55 (07) :37-42

[7] Forming of aluminum foam sandwich panels: Numerical simulations and experimental tests [J].

Contorno, D. ;

Filice, L. ;

Fratini, L. ;

Micari, F. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 177 (1-3) :364-367

[8] The formability of aluminum foam sandwich panels [J].

D'Urso, Gianluca ;

Maccarini, Giancarlo .

INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2012, 5 (03) :243-257

[9]

Filetin T., 2003, METALNE PJENE PROIZV, P29

[10]

Kosec B, 2003, METALL, V57, P134

← 1 2 →