Technology for sintering and testing of gearwheels for automotive gearboxes

被引:0
|
作者
Sokolov, Evgheni [1 ]
Kuncev, Lilo [1 ]
Hlebarski, Danail [1 ]
机构
[1] Tech Univ Sofia, Sofia 1000, Bulgaria
来源
INGINERIA AUTOMOBILULUI | 2014年 / 8卷 / 03期
关键词
Sintering; Gearwheel; Testing Equipment; Gearbox;
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In this paper, a method for testing of gearwheels for automotive gear boxes manufactured using the methods of powder metallurgy is presented, and the results obtained by this way are given. The methods of powder metallurgy comprise powder formation, forming, sintering, secondary pressing and heat treatment of gearwheels for automotive gearboxes. This modern technology presents opportunity for saving material and energy for the production of gearwheels, increase of productivity and reducing the net costs of the goods. Using this technology, a number of gearwheels were produced, which were used in automotive transmissions. The tests for fatigue and wear were done on a special re-fabricated test bench operating on recirculation power scheme. Afterwards the gearbox with the tested gearwheel was mounted on an automotive for road tests. The analysis of the results shows that the gearwheels produced by the technology of powder metallurgy can be used in automotive gearboxes.
引用
收藏
页码:22 / 26
页数:5
相关论文
共 50 条
  • [1] Investigating the efficiency of automotive manual gearboxes by experiment and simulation
    Schaffner, T.
    Allmaier, H.
    Girstmair, J.
    Reich, F.M.
    Tangasawi, O.
    Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 2014, 228 (04) : 341 - 354
  • [2] Methods of Testing Gearboxes of Rail Vehicles
    Petr, Karel
    Dynybyl, Vojtech
    EXPERIMENTAL STRESS ANALYSIS 51, 2014, 486 : 277 - 282
  • [3] Antispalling Effect of WS2 Nanoparticles on the Lubrication of Automotive Gearboxes
    Aldana, Paula Ussa
    Dassenoy, Fabrice
    Vacher, Beatrice
    Le Mogne, Thierry
    Thiebaut, Benoit
    Bouffet, Alain
    TRIBOLOGY TRANSACTIONS, 2016, 59 (01) : 178 - 188
  • [4] The Sintering of Supported Pd Automotive Catalysts
    Xu, Qing
    Kharas, Karl C.
    Croley, Brandon J.
    Datye, Abhaya K.
    CHEMCATCHEM, 2011, 3 (06) : 1004 - 1014
  • [5] Noble Metal Sintering Suppression Technology in Three-way Catalyst: Automotive Three-way Catalysts with the Noble Metal Sintering Suppression Technology Based on the Support Anchoring Effect
    Shinjoh, Hirofumi
    CATALYSIS SURVEYS FROM ASIA, 2009, 13 (03) : 184 - 190
  • [6] Noble Metal Sintering Suppression Technology in Three-way Catalyst: Automotive Three-way Catalysts with the Noble Metal Sintering Suppression Technology Based on the Support Anchoring Effect
    Hirofumi Shinjoh
    Catalysis Surveys from Asia, 2009, 13 : 184 - 190
  • [7] Development and Application of Sintering Dynamics Simulation for Automotive Catalyst
    Suzuki, Ai
    Nakamura, Katsuyoshi
    Sato, Ryo
    Okushi, Kotaro
    Koyama, Michihisa
    Tsuboi, Hideyuki
    Hatakeyama, Nozomu
    Endou, Akira
    Takaba, Hiromitsu
    Del Carpio, Carlos A.
    Kubo, Momoji
    Miyamoto, Akira
    TOPICS IN CATALYSIS, 2009, 52 (13-20) : 1852 - 1855
  • [8] Development and Application of Sintering Dynamics Simulation for Automotive Catalyst
    Ai Suzuki
    Katsuyoshi Nakamura
    Ryo Sato
    Kotaro Okushi
    Michihisa Koyama
    Hideyuki Tsuboi
    Nozomu Hatakeyama
    Akira Endou
    Hiromitsu Takaba
    Carlos A. Del Carpio
    Momoji Kubo
    Akira Miyamoto
    Topics in Catalysis, 2009, 52 : 1852 - 1855
  • [9] Science of flash-sintering and innovation to sintering technology
    Yamamoto T.
    Yoshida H.
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2020, 67 (11): : 593 - 600
  • [10] Technology of Sintering Phosphorite with KOH
    Skachkov, V. M.
    THEORETICAL FOUNDATIONS OF CHEMICAL ENGINEERING, 2023, 57 (03) : 316 - 320