OPTIMAL PLASTIC SHAPE DESIGN VIA THE BOUNDARY PERTURBATION METHOD

被引：9

作者：

EGNER, W

KORDAS, Z

ZYCZKOWSKI, M

机构：

[1] Institute of Mechanics and Machine Design, Cracow University of Technology (Politechnika Krakowska), Kraków, PL-31-155

来源：

STRUCTURAL OPTIMIZATION | 1994年 / 8卷 / 2-3期

关键词：

Structural design;

D O I：

10.1007/BF01743312

中图分类号：

TP39 [计算机的应用];

学科分类号：

081203 ; 0835 ;

摘要：

The paper presents the boundary perturbation method as applied to optimal plastic shape design. Perfect plasticity is assumed. The procedure consists of two steps: determination of a class of fully plastic solutions in the limit state (if possible), and then the choice of the optimal shape from among those solutions. Governing equations and boundary conditions for general perturbations of a circular cylinder under internal pressure are derived. Two examples of optimization concern non-circular shapes under plane strain conditions (heads of tension members) and pipes of variable diameter (transition zones). In both cases the minimal volume is the design objective under the constraint of given limit load-carrying capacity.

引用

页码：145 / 155

页数：11

共 25 条

[1]

Bochenek B., Kordas Z., Zyczkowski M., Optimal plastic design of a cross-section under torsion with small bending, J. Struct. Mech., 11, pp. 383-400, (1983)

[2]

Dollar A., Kordas Z., Kształty pretów silnie zakrzywionych poddanych zginaniu z rozciąganiem i ścinaniem, całkowicie uplastycznionych w stadium zniszczenia (in Polish), Mech. Teor. Stos., 18, pp. 603-622, (1980)

[3]

Egner W., Kordas Z., Zyczkowski M., On optimal plastic design of yoke elements, Mech. Teor. Stos., 31, pp. 717-744, (1993)

[4]

Gao H., A boundary perturbation analysis for elastic inclusions and interfaces, Int. J. Solids & Struct., 28, pp. 703-725, (1991)

[5]

Guz A.N., Nemysh, Boundary perturbation method in continuum mechanics, a survey (in Russian), Prikl. Mekhanika, 23, pp. 3-29, (1987)

[6]

Guz A.N., Nemysh, Boundary perturbation method in continuum mechanics (in Russian), (1989)

[7]

Ivlev D.D., Approximate solutions to elastic-plastic problems of perfect plasticity (in Russian), Dokl. AN SSSR, 113, (1957)

[8]

Kordas Z., Kształtowanie rurociągu o zmiennej średnicy, wykazujacego pełne uplastycznienie w stadium zniszczenia (in Polish), Mech. Teor. Stos., 11, pp. 455-465, (1973)

[9]

Kordas Z., Determination of non-circular shapes of doublyconnected disks showing full yielding at collapse, Bull. Acad. Pol. Sci., Ser. Sci. Techn., 27, pp. 279-286, (1979)

[10]

Kordas Z., Postrach H., Niekołowe kształty dwuspójnych tarcz wirujacych, całkowicie uplastycznionych w stadium zniszczenia (in Polish), Prace Komisji Mech. Stos. Oddz. Krak. PAN, 14, pp. 25-36, (1990)

← 1 2 3 →