COPRECIPITATION WITH METAL-HYDROXIDES FOR THE DETERMINATION OF BERYLLIUM IN SEAWATER BY GRAPHITE-FURNACE ATOMIC-ABSORPTION SPECTROMETRY

Coprecipitation first with magnesium hydroxide, next with tin(IV) hydroxide is developed for the determination of traces of beryllium in seawater. To a 200-ml sample is added a sodium hydroxide solution to form magnesium hydroxide at pH 11.5, on which beryllium is quantitatively coprecipitated. The precipitate is separated by centrifugation and dissolved in 2 ml of 12 mol/l hydrochloric acid. The resulting solution (ca. 10 ml) is mixed with 2 mg of tin(IV) carrier and the pH is adjusted to 5.0 to collect the beryllium on tin(IV) hydroxide, leaving magnesium ions in the solution. The tin(IV) hydroxide is centrifuged, dissolved in 0.1 ml of 5 mol/l hydrobromic acid, and then diluted to 1 ml with water. Magnesium is so added as to be 500 mu g/ml for increasing the sensitivity about four times, and the beryllium in the solution is determined by graphite furnace atomic absorption spectrometry. The experiments with synthetic seawater samples showed that pg - mu g amounts of beryllium can be coprecipitated on the metal hydroxides and beryllium at the low ng/l level can be determined with reasonable precision (RSD < 10%). The detection limit of the proposed method is 0.5 ng/l of beryllium in seawater.