Multi-attribute optimization of machining process parameters in powder mixed electro-discharge machining using TOPSIS and grey relational analysis

Powder Mixed Electro-Discharge Machining (PMEDM) is a hybrid machining process where a conductive powder is mixed to the dielectric fluid to facilitate effective machining of advanced material. In the present work application of Taguchi method in combination with Technique for order of preference by similarity to ideal solution (TOPSIS) and Grey Relational Analysis (GRA) have been adopted to evaluate the effectiveness of optimizing multiple performance characteristics for PMEDMof H-11 die steel using copper electrode. The effect of process variables such as powder concentration (C-p), peak current (I-p), pulse on time (T-on), duty cycle (DC) and gap voltage (V-g) on response parameters such as Material Removal Rate (MRR), ToolWear Rate (TWR), Electrode Wear Ratio (EWR) and Surface Roughness (SR) have been investigated using chromium powder mixed to the dielectric fluid. Analysis of variance (ANOVA) and F-test were performed to determine the significant parameters at a 95% confidence interval. Predicted results have been verified by confirmatory tests which show an improvement of 0.161689 and 0.2593 in the preference values using TOPSIS and GRA respectively. The recommended settings of process parameters is found to be C-p = 6 g/l, I-p = 6Amp, T-on = 100 mu s, DC = 90% and V-g = 50 V from TOPSIS and C-p = 6 g/l, I-p = 3Amp, T-on = 150 mu s, DC = 70% and V-g = 30 V from GRA. The microstructure analysis has been done for the optimal sample using Scanning Electron Microscope (SEM). (C) 2015, Karabuk University. Production and hosting by Elsevier B.V.