Relationthip Between Case Depth and Hardness in an Induction Hardened Medium Carbon Steel

被引：0
|
作者：
Ahmad, Tauseef [1 ]
Yousaf, Omar [1 ]
Salam, A. [1 ]
Ahmad, J. [1 ]
机构：
[1] Univ Punjab, Fac Engn & Technol, Lahore, Pakistan
来源：
JOURNAL OF THE PAKISTAN INSTITUTE OF CHEMICAL ENGINEERS | 2009年 / 37卷
关键词：
D O I：
暂无
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Surface hardening behaviour of a medium carbon steel (AISI 1045) was studied achieved by using induction hardening technique. Surface hardening of the specimens with different case depths was successfully achieved by using this technique. Case depths were produced on the specimens ranging from 0.80 mm to 2.50 mm. In all specimens the hardness of the case was significantly higher than the core. The hardness of the case slightly increased with increase in case depth for all specimens.
引用
收藏
页码：31 / 33
页数：3
相关论文
共 50 条
  • [1] DETERMINATION OF THE CASE DEPTH BY ULTRASONIC BACKSCATTER OF CASE AND INDUCTION HARDENED STEEL WITH A SOFT HARDNESS GRADIENT
    Graja, Paul
    Meyendorf, Norbert
    PROCEEDINGS OF 2021 48TH ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION (QNDE2021), 2021,
  • [2] Measurements and relations of hardness and depth of carbonization in case-hardened steel.
    Ammon, MA
    TRANSACTIONS OF THE AMERICAN INSTITUTE OF MINING AND METALLURGICAL ENGINEERS, 1912, 44 : 356 - 370
  • [3] Residual stresses and wear properties of induction-hardened medium carbon steel
    Liu, Q. C.
    Cao, Y. J.
    Sun, J. Q.
    He, Q. K.
    Tan, Y. L.
    Li, B. M.
    Xie, K.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2019, 233 (10) : 1554 - 1564
  • [4] SURFACE DURABILITY OF INDUCTION-HARDENED 0.45 PERCENT CARBON-STEEL AND ITS OPTIMUM CASE DEPTH
    FUJITA, K
    YOSHIDA, A
    NAKASE, K
    BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1979, 22 (169): : 994 - 1000
  • [5] EFFECTS OF CASE DEPTH AND NOTCH SHAPE ON FATIGUE PROPERTIES OF INDUCTION HARDENED STEEL
    KONUMA, S
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 (05): : S535 - S535
  • [6] Characterisation of case depth in induction-hardened medium carbon steels based on magnetic minor hysteresis loop measurement technique
    He, Cunfu
    Yang, Meng
    Liu, Xiucheng
    Wang, Xueqian
    Wu, Bin
    PHILOSOPHICAL MAGAZINE, 2017, 97 (31) : 2829 - 2844
  • [7] Case study: Optimization of Case Depth in Induction-hardened 42CrMo Steel Shaft
    Syed, R.
    Wang, J. G.
    Jing, D. Y.
    Liu, X. L.
    Yang, Y. M.
    Panhwar, M. F.
    Wang, K.
    Chen, Q. Y.
    2019 7TH INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND MATERIALS ENGINEERING (CMAME), 2020, 831
  • [8] Induction hardening of microalloyed medium-carbon steel: Characterization of pre-hardened microstructure
    Cunningham, J
    Medlin, DJ
    VanTyne, CJ
    Krauss, G
    FUNDAMENTALS AND APPLICATIONS OF MICROALLOYING FORGING STEELS, 1996, : 491 - 505
  • [9] Importance of induction hardened case depth in torsional applications
    Fett, Gregory A.
    Heat Treating Progress, 2009, 9 (06): : 15 - 19
  • [10] Evaluation of case depth in induction-hardened steels: Magnetic hysteresis measurements and hardness-depth profiling by differential permeability analysis
    Kobayashi, Satoru
    Takahashi, Hiroko
    Kamada, Yasuhiro
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2013, 343 : 112 - 118
12345