CIRCULATORY HIGH-VISCOSITY NON-NEWTONIAN FLUID FLOW IN A SINGLE-SCREW EXTRUDER CHANNEL

被引：1

作者：

Ponomareva, M. A. ^{[1
,2
]}

Filina, M. P. ^{[2
]}

Yakutenok, V. A. ^{[2
]}

机构：

[1] Tomsk State Univ, Phys & Math, Tomsk, Russia

[2] Tomsk State Univ, Tomsk, Russia

来源：

VESTNIK TOMSKOGO GOSUDARSTVENNOGO UNIVERSITETA-MATEMATIKA I MEKHANIKA-TOMSK STATE UNIVERSITY JOURNAL OF MATHEMATICS AND MECHANICS | 2016年 / 02期

关键词：

single-screw extruder; non-Newtonian fluid; Indirect Boundary Element Method; flow in lid-driven cavity;

D O I：

10.17223/19988621/40/10

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

This paper is devoted to definition of a width-to-depth ratio of a single-screw extruder channel when sidewalls do not affect the velocity profiles of circulatory high-viscosity non-Newtonian fluid flow at the mid of the channel. The channel has a rectangular cross-section. Power-law model is used to describe fluid behavior. The indirect boundary element method is used for numerical solution taking into account of sidewalls. Comparing of obtained velocity profiles with the known results showed a good agreement. Research is performed in the range of power-law index from 0.4 to 1.0. The method for obtaining the velocity component profiles for the case of shear-thinning fluid flow without considering influence of sidewalls is presented. The width-to-depth ratio of a single-screw extruder channel when it is acceptable to neglect influence of sidewalls on flow at the mid of the channel is defined.

引用

页码：97 / 107

页数：11

共 50 条

[1] FLOW PATTERNS IN A NON-NEWTONIAN FLUID IN A SINGLE-SCREW EXTRUDER
MOHR, WD
CLAPP, JB
STARR, FC
SPE TRANSACTIONS, 1961, 1 (03): : 113 - 120
[2] Extrusion of non-Newtonian fluids in a single-screw extruder with pressure back flow
State Univ of New Jersey, New Brunswick, United States
Polym Eng Sci, 3 (358-367):
[3] Extrusion of non-Newtonian fluids in a single-screw extruder with pressure back flow
Chiruvella, RV
Jaluria, Y
Sernas, V
Esseghir, M
POLYMER ENGINEERING AND SCIENCE, 1996, 36 (03): : 358 - 367
[4] FLOW PATTERNS OF A NEWTONIAN FLUID FLOWING IN A SINGLE-SCREW EXTRUDER WITH THE SCREW ROTATING
NEELAKANTAN, NR
INDIAN JOURNAL OF TECHNOLOGY, 1978, 16 (08): : 307 - 310
[5] Non-Newtonian flow modeling in the mixing section of a single-screw extruder with flow analysis network method
Wang, Y
Tsay, CC
POLYMER ENGINEERING AND SCIENCE, 1996, 36 (05): : 643 - 650
[6] NUMERICAL-SIMULATION OF FLUID-FLOW AND HEAT-TRANSFER IN A SINGLE-SCREW EXTRUDER FOR NON-NEWTONIAN FLUIDS
KARWE, MV
JALURIA, Y
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 1990, 17 (02) : 167 - 190
[7] FLOW PATTERNS OF A NEWTONIAN FLUID FLOWING IN A SINGLE-SCREW EXTRUDER WITH THE SCREW ROTATING.
Neelakantan, N.R.
1978, 16 (08): : 307 - 310
[8] Investigation on the non-Newtonian Fluid Flow in a Single Screw Extruder using Incompressible SPH (ISPH)
Dong, Tianwen
Jiang, Shunliang
Huang, Xingyuan
Liu, Hesheng
Huang, Qiangqiang
ADVANCED COMPOSITE MATERIALS, PTS 1-3, 2012, 482-484 : 745 - +
[9] Computational study of transport processes in a single-screw extruder for non-Newtonian chemically reactive materials
Gopalakrishna, S.
Jaluria, Y.
Sadhana - Academy Proceedings in Engineering Sciences, 1994, 19 (pt5) : 817 - 832
[10] COMPUTATIONAL STUDY OF TRANSPORT PROCESSES IN A SINGLE-SCREW EXTRUDER FOR NON-NEWTONIAN CHEMICALLY REACTIVE MATERIALS
GOPALAKRISHNA, S
JALURIA, Y
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 1994, 19 : 817 - 832

← 1 2 3 4 5 →