RESPONSE OF WHISKER-REINFORCED CERAMIC MATRIX COMPOSITES TO DYNAMIC COMPRESSIVE LOADING

被引：2
|
作者：
LANKFORD, J
BLANCHARD, CR
机构：
[1] Department of Materials and Mechanics, Southwest Research Institute, San Antonio
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 1991年 / 138卷 / 01期
关键词：
D O I：
10.1016/0921-5093(91)90676-E
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The compressive strength of SiC whisker-reinforced hot-pressed silicon nitride was characterized over a wide range of strain rate. It was found that the strength of the matrix alone is extremely sensitive to strain rate under impact loading, and that this sensitivity is retained in the reinforced condition, irrespective of whisker orientation. Superimposed on this effect is a peculiar decrease in strength for slightly lower strain rates; it is suggested that the origin of this decrease lies in grain boundary residual tensile stresses.
引用
收藏
页码：63 / 68
页数：6
相关论文
共 50 条
  • [41] DYNAMIC FATIGUE MEASUREMENTS OF WHISKER-REINFORCED MULLITE
    REDDY, KPR
    GADKAREE, KP
    AMERICAN CERAMIC SOCIETY BULLETIN, 1986, 65 (11): : 1477 - 1477
  • [42] Deformation of whisker-reinforced metal-matrix composites under changing temperature conditions
    Daehn, Glenn S., 1600, (20 A):
  • [43] Mechanical properties of hybrid multilayer graphene/whisker-reinforced ceramic composites: Simulation and experimental investigation
    Chen, Fei
    Yan, Ke
    Zhu, Yongsheng
    Hong, Jun
    CERAMICS INTERNATIONAL, 2022, 48 (18) : 25673 - 25680
  • [44] DEFORMATION OF WHISKER-REINFORCED METAL-MATRIX COMPOSITES UNDER CHANGING TEMPERATURE CONDITIONS
    DAEHN, GS
    GONZALEZDONCEL, G
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1989, 20 (11): : 2355 - 2368
  • [45] Numerical simulations of the dynamic compressive properties of ceramic particle reinforced metal matrix composites
    Zhang, J. T.
    Liu, L. S.
    Zhai, P. C.
    Zhang, M.
    Zhang, Q. J.
    MULTISCALE AND FUNCTIONALLY GRADED MATERIALS, 2008, 973 : 45 - 50
  • [46] PROGRESS IN PREPARATION AND WORKING OF WHISKER-REINFORCED METAL COMPOSITES
    HAHN, H
    DIVECHA, A
    LARE, P
    MECHANICAL ENGINEERING, 1967, 89 (08) : 54 - &
  • [47] Temperature-dependent fracture strength of whisker-reinforced ceramic composites: Modeling and factor analysis
    Shao, Jiaxing
    Li, Weiguo
    Li, Ying
    Deng, Yong
    Zhang, Xianhe
    Kou, Haibo
    Xu, Niandong
    Zhang, Xuyao
    Ma, Jianzuo
    Chen, Liming
    Qu, Zhaoliang
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2019, 102 (05) : 2841 - 2852
  • [48] ABRASIVE WEAR OF SILICON-CARBIDE PARTICULATE-REINFORCED AND WHISKER-REINFORCED 7091 ALUMINUM MATRIX COMPOSITES
    WANG, A
    RACK, HJ
    WEAR, 1991, 146 (02) : 337 - 348
  • [49] CRACK-WAKE DEBONDING AND TOUGHNESS IN FIBER-REINFORCED OR WHISKER-REINFORCED BRITTLE-MATRIX COMPOSITES
    NAIR, SV
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1990, 73 (10) : 2839 - 2847
  • [50] THE FAILURE OF FIBER-REINFORCED CERAMIC-MATRIX COMPOSITES UNDER DYNAMIC LOADING
    LANKFORD, J
    JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1995, 47 (05): : 64 - 68
12345