The effect of multi-axis forging and heat treatment on the structure and mecanical properties of nickel-iron superalloy

被引：3
|
作者：
Mukhtarov, S. K. [1 ]
Nagimov, M. I. [1 ]
Ermachenko, A. G. [1 ]
机构：
[1] RAS, Inst Met Superplast Problems, Khalturin St 39, Ufa 450001, Russia
来源：
LETTERS ON MATERIALS-PIS MA O MATERIALAKH | 2012年 / 2卷 / 04期
关键词：
ultrafine grained alloy; nickel-iron superalloy; heat treatment; mechanical properties;
D O I：
10.22226/2410-3535-2012-4-257-261
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A comparative analysis of structure, mechanical properties and fracture surfaces of ultrafine grained Inconel 718 obtained by multiple isothermal forging is performed. The refinement of structure down to 80 nm via multiple forging results in the strength increase and in the room temperature plasticity decrease. After the heat treatment the alloy (d=4 mu m) had gained ultimate tensile strength of about 1520 MPa that is 15% higher than that of coarse grained alloy. Room temperature fatigue test for 10(5) cycles revealed the rise of the durability of heat treated alloy by 1.7 times as compared to the coarse grained alloy.
引用
收藏
页码：257 / 261
页数：5
相关论文
共 50 条
  • [1] Effects of Phosphorus on Creep Properties of Nickel-Iron Base Superalloy
    Takasawa, Koichi
    Chinen, Hibiki
    Ohkawa, Takuya
    Maeda, Eiji
    Hatano, Takashi
    ISIJ INTERNATIONAL, 2015, 55 (05) : 1100 - 1105
  • [2] Effect of sintering temperature and heat treatment on microstructure and properties of nickel-based superalloy
    Lei, Yiwen
    Li, Xiaolong
    Sun, Ronglu
    Tang, Ying
    Niu, Wei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 818
  • [3] HEAT TREATMENT AND PROPERTIES OF NICKEL SUPERALLOY 718PLUS
    Zyka, Jiri
    Hlous, Jan
    Podhorna, Bozena
    Dobrovska, Jana
    Hrbacek, Karel
    METAL 2010: 19TH INTERNATIONAL METALLURGICAL AND MATERIALS CONFERENCE, 2010, : 906 - 910
  • [4] HEAT TREATMENT AND PROPERTIES OF NICKEL SUPERALLOY MAR-M-247
    Zyka, Jiri
    Podhorna, Bozena
    Hrbacek, Karel
    METAL 2011: 20TH ANNIVERSARY INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2011, : 1033 - 1038
  • [5] The Effect of Forging and Heat Treatment Variables on Microstructure and Mechanical Properties of a Re-Bearing Powder-Metallurgy Nickel Base Superalloy
    Mukhtarov, Shamil
    Karyagin, Dmitry
    Ganeev, Artem
    Zainullin, Rishat
    Shakhov, Ruslan
    Imayev, Valery
    METALS, 2023, 13 (06)
  • [6] Effect of heat treatment on the microstructure and recrystallization of an SLM nickel-based superalloy
    Zhou, Shuheng
    Liu, Lirong
    Yang, Yanhong
    Lv, Peisen
    MATERIALS TODAY COMMUNICATIONS, 2024, 39
  • [7] Effect of hot extrusion and heat treatment on microstructure of nickel-base superalloy
    Liu, Chen-ze
    Liu, Feng
    Huang, Lan
    Jiang, Liang
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (08) : 2544 - 2553
  • [8] EFFECT OF THE HEAT TREATMENT ON THE MICROSTRUCTURAL EVOLUTION OF THE NICKEL BASED SUPERALLOY
    Retima, Mohamed
    Bouyegh, Saida
    Chadli, Hacene
    METALLURGICAL & MATERIALS ENGINEERING-ASSOCIATION OF METALLURGICAL ENGINEERS OF SERBIA, 2011, 17 (02): : 71 - 77
  • [9] INVESTIGATION OF HEAT TREATMENT PARAMETERS EFFECT ON THE MICROSTRUCTURE AND ON THE MECHANICAL PROPERTIES OF A POWDER METALLURGY NICKEL-BASE SUPERALLOY
    Dumont, Alice
    Naze, Loic
    Koester, Alain
    Remy, Luc
    Guedou, Jean-Yves
    Franchet, Jean-Michel
    21ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2012), 2012, : 1273 - 1279
  • [10] Effect of hot forging on formation of a fine-grained structure and mechanical properties of a powder metallurgy nickel base superalloy
    Zainullin, R. I.
    Mukhtarov, Sh. Kh.
    Ganeev, A. A.
    Shakhov, R. V.
    Imayev, V. M.
    LETTERS ON MATERIALS, 2023, 13 (4S): : 414 - 419
12345