OPTIMIZATION OF SURFACE ROUGHNESS OF DUPLEX STAINLESS STEEL IN DRY TURNING OPERATION USING TAGUCHI TECHNIQUE

被引：4

作者：

Selvaraj, D. Philip ^{[1
]}

机构：

[1] Karunya Inst Technol & Sci, Dept Mech Engn, Coimbatore 641114, Tamil Nadu, India

来源：

MATERIALS PHYSICS AND MECHANICS | 2018年 / 40卷 / 01期

关键词：

duplex stainless steel; dry turning; surface roughness; Taguchi technique;

D O I：

10.18720/MPM.4012018_8

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents the results of experimental work carried out in dry turning operation of nitrogen alloyed duplex stainless steel ASTM A 995 Grade 5A. In this investigation, the cutting parameters considered were cutting speed, feed rate and depth of cut. The effects of these cutting parameters on the surface roughness were analyzed using Taguchi technique. The results revealed that the feed rate is the most important parameter affecting the surface roughness, followed by cutting speed and depth of cut. The minimum surface roughness was obtained when the process parameters were set at their optimum values.

引用

页码：63 / 70

页数：8

共 50 条

[21] Optimization of Surface Roughness in Dry Turning of Brass [J].

Lasunon, On-Uma .

ADVANCED MATERIALS AND PROCESSES III, PTS 1 AND 2, 2013, 395-396 :1035-1039

[22] Taguchi Design of Experiments for Optimization and Modeling of Surface Roughness When Dry Turning X210Cr12 Steel [J].

Zerti, Oussama ;

Yallese, Mohamed Athmane ;

Belhadi, Salim ;

Bouzid, Lakhdar .

APPLIED MECHANICS, BEHAVIOR OF MATERIALS, AND ENGINEERING SYSTEMS, 2017, :275-288

[23] OPTIMIZATION OF SURFACE ROUGHNESS AND FLANK WEAR IN TURNING SCM440 ALLOY STEEL USING TAGUCHI METHOD [J].

Thirumalai, R. ;

Srinivas, S. ;

Vinodh, T. ;

Kumar, A. L. Kowshik ;

Kumar, M. Kishore .

DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 :641-646

[24] Laser Surface Modification of Duplex Stainless Steel 2205 to Modify the Surface Roughness [J].

Arshad, Y. ;

Linggamm, R. ;

Quazi, M. M. ;

Aiman, M. H. ;

Ishak, M. ;

Zaifuddin, A. Q. ;

Qaban, Abdullah .

INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2021, 18 (02) :8695-8703

[25] Study on the Machining of Duplex Stainless Steel and its Microstructure and Surface Roughness [J].

Janardhan L. ;

Chandrappa K. ;

Suresh R. .

International Journal of Vehicle Structures and Systems, 2023, 15 (02) :234-238

[26] Taguchi optimization of surface roughness and flank wear during the turning of DIN 1.2344 tool steel [J].

Kara, Fuat .

MATERIALS TESTING, 2017, 59 (10) :903-908

[27] MICROHARDNESS CHANGES GRADIENT OF THE DUPLEX STAINLESS STEEL (DSS) SURFACE LAYER AFTER DRY TURNING [J].

Krolczyk, G. ;

Nieslony, P. ;

Legutko, S. ;

Stoic, A. ;

Samardzic, I. .

METALURGIJA, 2014, 53 (04) :529-532

[28] Dry turning optimization of austenitic stainless steel 316L based on Taguchi and TOPSIS approaches [J].

Touggui, Youssef ;

Belhadi, Salim ;

Mabrouki, Tarek ;

Temmar, Mustapha ;

Yallese, Mohamed Athmane .

MATERIAUX & TECHNIQUES, 2020, 108 (04)

[29] Modelling and Optimization of the Surface Roughness in the Dry Turning of the Cold Rolled Alloyed Steel Using Regression Analysis [J].

Tanikic, Dejan ;

Marinkovic, Velibor .

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2012, 34 (01) :41-48

[30] Optimization of Machining Parameters in Steel Turning Operation by Taguchi Method [J].

Abhang, L. B. ;

Hameedullah, M. .

INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING, 2012, 38 :40-48

← 1 2 3 4 5 →