OPTIMIZATION OF SURFACE ROUGHNESS OF DUPLEX STAINLESS STEEL IN DRY TURNING OPERATION USING TAGUCHI TECHNIQUE

被引：4

作者：

Selvaraj, D. Philip ^{[1
]}

机构：

[1] Karunya Inst Technol & Sci, Dept Mech Engn, Coimbatore 641114, Tamil Nadu, India

来源：

MATERIALS PHYSICS AND MECHANICS | 2018年 / 40卷 / 01期

关键词：

duplex stainless steel; dry turning; surface roughness; Taguchi technique;

D O I：

10.18720/MPM.4012018_8

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents the results of experimental work carried out in dry turning operation of nitrogen alloyed duplex stainless steel ASTM A 995 Grade 5A. In this investigation, the cutting parameters considered were cutting speed, feed rate and depth of cut. The effects of these cutting parameters on the surface roughness were analyzed using Taguchi technique. The results revealed that the feed rate is the most important parameter affecting the surface roughness, followed by cutting speed and depth of cut. The minimum surface roughness was obtained when the process parameters were set at their optimum values.

引用

页码：63 / 70

页数：8

共 50 条

[11] Optimization Of Turning Parameters On Surface Roughness Based On Taguchi Technique [J].

Sahithi, V. V. D. ;

Malayadrib, T. ;

Srilatha, N. .

MATERIALS TODAY-PROCEEDINGS, 2019, 18 :3657-3666

[12] PREDICTION OF SURFACE ROUGHNESS IN END MILLING OPERATION OF DUPLEX STAINLESS STEEL USING RESPONSE SURFACE METHODOLOGY [J].

Philip, S. D. ;

Chandramohan, P. ;

Rajesh, P. K. .

JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2015, 10 (03) :340-352

[13] Surface Roughness Optimization of EN24 Steel in CNC Turning using Taguchi Method [J].

Vignesh S.H. .

International Journal of Vehicle Structures and Systems, 2023, 15 (05) :631-635

[14] Parametric optimization of dry turning for improved machining of duplex stainless steel (DSS2205) using response surface methodology (RSM) and design of experiments (DOE) [J].

Thakur, Rahul ;

Sahu, Neelesh Kumar ;

Shukla, Rajendra Kumar .

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2024, 50 (01)

[15] Analysis of Surface Roughness and Machine Learning-Based Modeling in Dry Turning of Super Duplex Stainless Steel Using Textured Tools [J].

Pawanr, Shailendra ;

Gupta, Kapil .

TECHNOLOGIES, 2025, 13 (06)

[16] Optimization of cutting forces and surface roughness in dry turning of AM magnesium alloy using Taguchi method [J].

Kolluru, Uday Kiran ;

Narala, Suresh Kumar Reddy ;

Dutta, Sunil .

MATERIALS TODAY-PROCEEDINGS, 2021, 38 :2830-2838

[17] Machinability Study of Duplex Stainless Steel 2205 During Dry Turning [J].

Sonawane, Gaurav D. ;

Sargade, Vikas G. .

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2020, 21 (05) :969-981

[18] INVESTIGATIONS INTO SURFACE INTEGRITY IN THE TURNING PROCESS OF DUPLEX STAINLESS STEEL [J].

Krolczyk, Grzegorz ;

Legutko, Stanislaw .

TRANSACTIONS OF FAMENA, 2014, 38 (02) :77-82

[19] Analysis of Surface Roughness during Turning Operation by Taguchi Method [J].

Khare, Sanchit Kumar ;

Agarwal, Sanjay ;

Srivastava, Shivam .

MATERIALS TODAY-PROCEEDINGS, 2018, 5 (14) :28089-28097

[20] Optimization of surface roughness using Taguchi technique for aluminium metal matrix composite [J].

Tamang, S. K. ;

Devi, Dipika ;

Seenivasan, M. ;

Gopalsamy, N. .

MATERIALS TODAY-PROCEEDINGS, 2022, 62 :2029-2033

← 1 2 3 4 5 →