AN ANALYTICAL STUDY ON THE ROTATIONAL ACCURACY OF EXTERNALLY PRESSURIZED AIR JOURNAL BEARING

被引：9
|
作者：
KIM, KM
KIM, KW
机构：
[1] Inst of Science and Technology, Seoul
来源：
JSME INTERNATIONAL JOURNAL SERIES III-VIBRATION CONTROL ENGINEERING ENGINEERING FOR INDUSTRY | 1992年 / 35卷 / 03期
关键词：
EXTERNALLY PRESSURIZED AIR BEARING; JOURNAL BEARING; ROTATIONAL ACCURACY; SHAPE ERROR; ROUNDNESS; POINT SOURCE SOLUTION;
D O I：
10.1299/jsmec1988.35.485
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The effect of shape error on the rotational accuracy of an externally pressurized air journal bearing with point sources is analyzed theoretically. The shape errors taken into account are roundness errors of both the journal and bearing, and the roundness profile is assumed to be of a sinusoidal lobe shape. The rotational accuracy is studied by investigating the amplitude of the journal center locus calculated by nonlinear analysis of the Reynolds equation for compressible fluid. The mass unbalance effect on rotational accuracy is not considered in this paper. It is shown that roundness errors, frequency of roundness profile, feeding parameter, and load significantly affect the rotational accuracy of an externally pressurized air journal bearing.
引用
收藏
页码：485 / 492
页数：8
相关论文
共 50 条
  • [1] Pneumatic hammer in an externally pressurized orifice-compensated air journal bearing
    Talukder, HM
    Stowell, TB
    TRIBOLOGY INTERNATIONAL, 2003, 36 (08) : 585 - 591
  • [2] Externally pressurized gas journal bearing with slot restrictors arranged in the axial direction
    Ise, Tomohiko
    Nakatsuka, Masaya
    Nagao, Kohei
    Matsubara, Masami
    Kawamura, Shozo
    Asami, Toshihiko
    Kinugawa, Tomoya
    Nishimura, Kazuhiko
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2017, 50 : 286 - 292
  • [3] Effect of shape errors on the stability of externally pressurized air journal bearings using semi-implicit scheme
    Song, Minseok
    Azam, Siraj
    Jang, Jaehyeok
    Park, Sang-Shin
    TRIBOLOGY INTERNATIONAL, 2017, 115 : 580 - 590
  • [4] A STUDY ON RUN-OUT CHARACTERISTICS OF EXTERNALLY PRESSURIZED GAS JOURNAL BEARING (MODIFIED DF METHOD FOR POINT-SOURCE SOLUTION)
    YABE, H
    JSME INTERNATIONAL JOURNAL SERIES C-DYNAMICS CONTROL ROBOTICS DESIGN AND MANUFACTURING, 1994, 37 (02): : 362 - 368
  • [5] Modal Analysis of Externally Pressurized Air Bearing Workbench Based on Spring-mass System Method
    Zhang, B.
    Ma, P.
    Huang, J. J.
    HIGH SPEED MACHINING, 2011, 188 : 602 - 607
  • [6] Performance analysis of rotating externally pressurized air bearings
    Liu, Z-S
    Zhang, G-H
    Xu, H-J
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2009, 223 (J4) : 653 - 663
  • [7] Performance of externally pressurized non-recessed roughened journal bearing system operating with non-Newtonian lubricant
    Nagaraju, T
    Sharma, SC
    Jain, SC
    TRIBOLOGY TRANSACTIONS, 2003, 46 (03) : 404 - 413
  • [8] A study of run-out of externally pressurized air bearing -analysis of run-out based on profile error of spindle radial direction
    Tomita, Hirotaka
    Takahashi, Masaaki
    Koizumi, Kouichi
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2009, 75 (04): : 525 - 529
  • [9] Rotational accuracy and positioning resolution of an air-bearing spindle with Active Inherent Restrictors
    Mizumoto, H
    Arii, S
    Yabuya, M
    INITIATIVES OF PRECISION ENGINEERING AT THE BEGINNING OF A MILLENNIUM, 2001, : 709 - 713
  • [10] The analytical calculation of journal bearing parameters by means of the finite bearing theory
    Ionescu, Mihail
    LUBRICATION SCIENCE, 2011, 23 (08) : 347 - 353
12345