CONTROL OF MICROSTRUCTURE OF ALUMINA CERAMICS BY DISPERSION OF NANO-SIC PARTICULATES

被引:0
|
作者
JANG, B
ENOKI, M
KISHI, T
机构
来源
NIPPON SERAMIKKUSU KYOKAI GAKUJUTSU RONBUNSHI-JOURNAL OF THE CERAMIC SOCIETY OF JAPAN | 1994年 / 102卷 / 09期
关键词
MICROSTRUCTURE; GRAIN SIZE; AL2O3/SIC COMPOSITES; NANO COMPOSITES; RELATIVE DENSITY; GRAIN GROWTH;
D O I
暂无
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Al2O3/SiC composites were prepared by hot-pressing in order to investigate the microstructural characteristics and nano-disperse behavior of alumina matrix composites. The grain size of the monolithic alumina ceramics increased with increasing hot-pressing temperature, and the exaggerated grain growth occurred above 1800-degrees-C. However, the addition of SiC particulates effectively suppressed the growth of the alumina matrix in the composites. The average matrix grain size was smaller and the grain size distribution was narrower than those of the monolithic alumina ceramics. Very fine SiC particulates were well dispersed in composites as nano-sized intragranular grains in the alumina matrix, on the other hand, coarse SiC particulates were found to exist at grain boundaries of the alumina matrix. The intragranular SiC seems to be trapped like a pores in the matrix grains during the densification by hot-pressing. It is concluded that nano-sized SiC particulates are grain growth inhibitors and microstructural stabilizers thus giving a uniform microstructures with fine grains.
引用
收藏
页码:863 / 867
页数:5
相关论文
共 50 条
  • [31] EFFECT OF NANO-ALUMINA AND COPPER MICRON SIZE PARTICULATES ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF MAGNESIUM ALLOY AZ31
    Quy Bau Nguyen
    Tun, K. S.
    Gupta, M.
    MAGNESIUM TECHNOLOGY 2012, 2012, : 187 - 189
  • [32] Investigating nano-SiC reinforced WE43 magnesium matrix surface composites
    Kang, Amardeep Singh
    Singh, Ravinder Pal
    Singla, Shivali
    ENGINEERING RESEARCH EXPRESS, 2024, 6 (02):
  • [33] Laser Surface Alloying of ZM5 Mg Alloy with Nano-SiC Powder
    Chen, C-J.
    Zhang, M.
    Chang, Q-M.
    Zhang, S-C.
    Ma, H-Y.
    LASERS IN ENGINEERING, 2010, 20 (5-6) : 297 - 309
  • [34] Rheological properties and spray-drying behaviors of nano-SiC based aqueous slurry
    Guo, Xingzhong
    Yang, Hui
    Zhu, Xiaoyi
    Lin, Zhu
    Zhang, Lingjie
    MECHANICS OF MATERIALS, 2012, 46 : 11 - 15
  • [35] PREPARATION OF ALUMINUM MATRIX COMPOSITES REINFORCED WITH NANO-SIC PARTICLES BY STIR CASTING TECHNIQUE
    Li, Xiaodan
    Zhai, Yuchun
    Qiu, Feng
    Zhang, Haixin
    TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS CHARACTERIZATION, COMPUTATION AND MODELING AND ENERGY, 2010, : 295 - 300
  • [36] Role of Different Fractions of Nano-size SiC and Milling Time on the Microstructure and Mechanical Properties of Al-SiC Nanocomposites
    Pakseresht, A. H.
    Baghbaderani, H. Ahmadian
    Yazdani-Rad, R.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2016, 69 (05) : 1007 - 1014
  • [37] Influence of nano alumina addition on the properties of SiC refractories
    Velappan, S.
    Raja, S.
    INTERNATIONAL JOURNAL OF NANOTECHNOLOGY, 2021, 18 (5-8) : 472 - 482
  • [38] Corrosion performance characteristics of heat treated Al-6082 with nano-SiC reinforcements
    Srinath, M. K.
    Nagendra, J.
    Bopanna, K. D.
    Swamy, S. Sujeeth
    Ravikumar, M.
    MATERIALS LETTERS, 2022, 322
  • [39] Assessment of Microstructure and Mechanical Properties of Stir Zone Seam of Friction Stir Welded Magnesium AZ31B through Nano-SiC
    Subramani, Vijayakumar
    Jayavel, Balaji
    Sengottuvelu, Ramesh
    Lazar, Prince Jeya Lal
    MATERIALS, 2019, 12 (07)
  • [40] Microstructure and toughening of SiC-AlN ceramics induced by seeding with α-SiC
    Lim, Chang Sung
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2010, 11 (06): : 716 - 720