Influence of Post Weld Heat Treatment on the HAZ of Low Alloy Steel Weldments

被引:0
|
作者
Mohideen, S. Rasool [1 ]
Zaidi, A. M. Ahmad [1 ]
机构
[1] UTHM, Fac Mech & Mfg Engn, Parit Raja, Malaysia
来源
INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING | 2010年 / 2卷 / 01期
关键词
Fracture Toughness; Heat Affected Zone; Low Alloy Steel; Weldments; Post Weld Heat Treatment;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The heterogeneous nature of weldments demands an additional processing to retain and/or improve the joint properties. Heat Affected Zone, the zone Adjacent to the weld metal zone is critically affected by the sudden dissipation of heat from weld metal during welding. Toughness of this zone becomes weak as the grains get coarsened and the interface between the two regions is more prone to fracture. Post weld heat treatment is thus generally carried out on the weldments to relive the thermal residual stresses and to enhance the properties of welded joints. This paper discusses about the influence of post weld heat treatment on the fracture toughness of low alloy steel weldments. Fracture toughness of heat treated weldments was determined using standard CTOD test and the results were correlated.
引用
收藏
页码:7 / 11
页数:5
相关论文
共 50 条
  • [21] Effect of molybdenum and nitrogen on HAZ and weld deposit corrosion in cast stainless steel weldments
    Bavadekar, S.D.
    Chakrabarti, A.K.
    Datta, G.L.
    Journal of the Institution of Engineers (India), Part MM: Metallurgy & Material Science Division, 1996, 77
  • [22] Influence of post-weld heat treatments on microstructure and mechanical properties of gas tungsten arc maraging steel weldments
    Rao, V. Venkateswara
    Reddy, G. Madhusudhan
    Raju, A. V. Sitarama
    MATERIALS SCIENCE AND TECHNOLOGY, 2010, 26 (12) : 1459 - 1468
  • [23] RESIDUAL STRESS ANALYSIS OF BEAD WELDED LOW ALLOY STEEL PLATE SPECIMENS SUBJECTED TO POST WELD HEAT TREATMENT
    Yanagida, Nobuyoshi
    Saito, Koichi
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2011, VOL 6, A AND B, 2012, : 1421 - 1428
  • [24] Investigation into Microstructures of Maraging Steel 250 Weldments and Effect of Post-Weld Heat Treatments
    Fawad Tariq
    Rasheed Ahmed Baloch
    Bilal Ahmed
    Nausheen Naz
    Journal of Materials Engineering and Performance, 2010, 19 : 264 - 273
  • [25] Investigation into Microstructures of Maraging Steel 250 Weldments and Effect of Post-Weld Heat Treatments
    Tariq, Fawad
    Baloch, Rasheed Ahmed
    Ahmed, Bilal
    Naz, Nausheen
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2010, 19 (02) : 264 - 273
  • [26] Mitigating HAZ softening of friction stir welded ferrite-martensite DP steel followed by post weld heat treatment
    Han, Seung-Chang
    Chaudry, Umer Masood
    Tariq, Hafiz Muhammad Rehan
    Jun, Tea- Sung
    MATERIALS LETTERS, 2023, 349
  • [27] Recovery and recrystallization in modified 9Cr-1Mo steel weldments after post-weld heat treatment
    Gao, Qiuzhi
    Di, Xinjie
    Liu, Yongchang
    Yan, Zesheng
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2012, 93-94 : 69 - 74
  • [28] Influence of heat input on mechanical properties of multipass low-alloy steel weld metal
    Bang, Kook-soo
    Park, Chan
    Chan, Woong-sung
    Park, Chul-gyu
    Chung, Woo-hyun
    ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY, 2008, 580-582 : 17 - +
  • [29] The effect of post-weld heat treatments on the microstructure and mechanical properties of maraging steel laser weldments
    Reddy, G. Madhusudhan
    Rao, V. V.
    Raju, A. V. S.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2009, 223 (L4) : 149 - 159
  • [30] INFLUENCE OF WELD DEFECTS ON MECHANICAL PROPERTIES OF ALUMINUM ALLOY WELDMENTS
    PENSE, AW
    STOUT, RD
    WELDING RESEARCH COUNCIL BULLETIN, 1970, (152): : 1 - &