Correlation among Hydraulic Parameters of Moving Hydraulic Jump in Rectangular Open Channels

被引：1
作者：
Nasvi, M. C. M. [1 ]
Asmeer, Z. A. M. [1 ]
Mowsoom, F. M. [1 ]
Pathirana, K. P. P. [2 ]
机构：
[1] Univ Peradeniya, Dept Civil Engn, Peradeniya, Sri Lanka
[2] Univ Peradeniya, Dept Civil Engn, Civil Engn, Peradeniya, Sri Lanka
来源：
ENGINEER-JOURNAL OF THE INSTITUTION OF ENGINEERS SRI LANKA | 2010年 / 43卷 / 03期
关键词：
Specific Energy; hydraulic jump; bed friction; supercritical; sub critical;
D O I：
10.4038/engineer.v43i3.6970
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The moving hydraulic jump is a phenomenon, which is often observed in field conditions. Since the parameters of moving hydraulic jump vary with time, analytical equations cannot be used to derive relationships among hydraulic jump parameters. Experimental investigations were carried out to study the relationships among hydraulic parameters of a moving hydraulic jump in a rectangular flume. The flow parameters were recorded for the moving hydraulic jump produced for different sluice gate opening sizes. Based on the recorded data, flows parameters such as specific energy, flow rate and pressure force at downstream of the hydraulic jump were calculated. Also, using momentum and energy equations time independent relationships were obtained. The relationship among moving hydraulic jump parameters were obtained in non dimensional form. The correlations between stationary and moving hydraulic jump parameters such as specific energy, flow rate, pressure force and flow depth were derived.
引用
收藏
页码：20 / 25
页数：6
相关论文
共 11 条
  • [1] Chanson H, 2007, 6 INT C MULTIPHASE F, P1
  • [2] French Richard H., 1986, OPEN CHANNEL HYDRAUL, P79
  • [3] NUMERICAL-SIMULATION OF HYDRAULIC JUMP
    GHARANGIK, AM
    CHAUDHRY, MH
    [J]. JOURNAL OF HYDRAULIC ENGINEERING-ASCE, 1991, 117 (09): : 1195 - 1211
  • [4] Kim W., 2000, 4 INT C HYDR SCI ENG, P26
  • [5] Montes J.S., 1998, ASCE J HYDRAULIC ENG, V124, P192
  • [6] Nalluri C., 2001, CIVIL ENG HYDRAULICS, P204
  • [7] HYDRAULIC JUMP IN SLOPING CHANNELS
    OHTSU, I
    YASUDA, Y
    [J]. JOURNAL OF HYDRAULIC ENGINEERING-ASCE, 1991, 117 (07): : 905 - 921
  • [8] Rizi A. Parvaresh, 2006, Journal of Applied Sciences, V6, P1192
  • [9] EXTREME PRESSURES IN HYDRAULIC-JUMP STILLING BASINS
    TOSO, JW
    BOWERS, CE
    [J]. JOURNAL OF HYDRAULIC ENGINEERING, 1988, 114 (08) : 829 - 843
  • [10] Tseng M.H., 2001, ASCE J HYDRAULIC ENG, V127, P115
12