Tensile Properties of Plain Weave Glass Fabric Reinforced Epoxy Resin Laminates at Low Temperatures

被引：1
|
作者：
Kim, Yonjig
机构：
来源：
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A | 2008年 / 32卷 / 09期
关键词：
Polymer Matrix Composite; Glass Fiber Reinforced Plastic; Autoclave Molding; Plain Weave Prepreg; Tensile Chord Modulus of Elasticity;
D O I：
10.3795/KSME-A.2008.32.9.788
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
To understand the tensile behaviors of GFRP at low temperature, three types of specimen have been used in this study. Tensile properties and fracture mechanisms for three orthogonal orientations of plain weave glass fabric reinforced epoxy resin laminate were investigated at temperature range of about -30 to 15 degrees C. The tensile properties of axial and edge type specimen decrease slightly with decreasing temperature to -20 degrees C. However, at -30 degrees C the decreases in the tensile properties increased considerably. Below -20 degrees C, thickness type specimen showed a marked decreases in the tensile properties. It was obvious that the fracture manner of thickness type specimen was adhesive failure at above -10 degrees C and a mixed adhesive and cohesive failure at below -20 degrees C.
引用
收藏
页码：788 / 795
页数：8
相关论文
共 19 条
  • [1] The effects of stitch orientation on the tensile and open hole tension properties of carbon/epoxy plain weave laminates
    Yudhanto, Arief
    Watanabe, Naoyuki
    Iwahori, Yutaka
    Hoshi, Hikaru
    MATERIALS & DESIGN, 2012, 35 : 563 - 571
  • [2] Study of Tensile Strength of Glass Epoxy Laminates with Varied Open Hole Diameter
    Samlal S.
    Chandru D.
    Kumaar K.S.N.
    Ganesh G.
    International Journal of Vehicle Structures and Systems, 2022, 14 (01) : 116 - 120
  • [3] Room- and low-temperature deformation of multilayered fiberglass plastics reinforced with a fabric of sateen weave
    Kucher, NK
    Dveyrin, AZ
    Zarazovskii, MN
    Zemtsov, MP
    MECHANICS OF COMPOSITE MATERIALS, 2004, 40 (03) : 217 - 226
  • [4] Room- and Low-Temperature Deformation of Multilayered Fiberglass Plastics Reinforced with a Fabric of Sateen Weave
    N. K. Kucher
    A. Z. Dveyrin
    M. N. Zarazovskii
    M. P. Zemtsov
    Mechanics of Composite Materials, 2004, 40 : 217 - 226
  • [5] Investigation on the optimized curing cycle of epoxy resin for enhancing thermal and mechanical properties of glass fiber reinforced plastic applications
    Kang, Seung In
    Son, Seung Mo
    Heo, Su Jeong
    Seong, Dong Gi
    FUNCTIONAL COMPOSITES AND STRUCTURES, 2025, 7 (01):
  • [6] Effect of γ irradiation on the properties of basalt fiber reinforced epoxy resin matrix composite
    Li, Ran
    Gu, Yizhuo
    Yang, Zhongjia
    Li, Min
    Wang, Shaokai
    Zhang, Zuoguang
    JOURNAL OF NUCLEAR MATERIALS, 2015, 466 : 100 - 107
  • [7] Characterisation of the mechanical and fracture properties of a uni-weave carbon fibre/epoxy non-crimp fabric composite.
    Bru, Thomas
    Hellstrom, Peter
    Gutkin, Renaud
    Ramantani, Dimitra
    Peterson, Goran
    DATA IN BRIEF, 2016, 6 : 680 - 695
  • [8] The Effect of UV Radiation on Physicochemical Properties of Winding Epoxy Glass Fiber Reinforced Plastics
    Lukashov N.I.
    Korokhin R.A.
    Gorbunova I.Y.
    Kireinov A.V.
    Vyatkina M.A.
    Tret’yakov I.V.
    Polymer Science - Series D, 2022, 15 (02) : 183 - 187
  • [9] Mechanical properties of mechanically-defibrated cellulose nanofiber reinforced epoxy resin matrix composites
    Kurita, Hiroki
    Ishigami, Ryugo
    Wu, Chen
    Narita, Fumio
    JOURNAL OF COMPOSITE MATERIALS, 2021, 55 (04) : 455 - 463
  • [10] Effects of curing time and de-molding temperature on the deformation of glass fiber/epoxy resin prepreg laminates fabricated by rapid hot press
    Zhang, Kaomin
    Gu, Yizhuo
    Li, Min
    Wang, Shaokai
    Zhang, Zuoguang
    POLYMERS & POLYMER COMPOSITES, 2019, 27 (06) : 301 - 313
12