Effect of Carbon Source on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics

被引：7
|
作者：
Lim, Kwang-Young [1 ]
Kim, Young-Wook [1 ]
Woo, Sang-Kuk [2 ]
Han, In-Sub [2 ]
机构：
[1] Univ Seoul, Dept Mat Sci & Engn, Seoul 130743, South Korea
[2] Korea Inst Energy Res, Energy Mat Res Ctr, Daejon 305343, South Korea
来源：
JOURNAL OF THE KOREAN CERAMIC SOCIETY | 2008年 / 45卷 / 07期
关键词：
Porous ceramics; Silicon carbide; Self-bonded SiC; Porosity; Strength;
D O I：
10.4191/kcers.2008.45.7.430
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Porous self-bonded silicon carbide (SBSC) ceramics were fabricated at temperatures ranging from 1700 to 1850 degrees C using SiC, silicon (Si), and three different carbon (C) sources, including carbon black, phenol resin, and xylene. The effects of the Si:C ratio and carbon source on porosity and strength were investigated as a function of sintering temperature. Porous SBSC ceramics fabricated from phenol resin showed higher porosity than the others. In contrast, porous SBSC ceramics fabricated from carbon black showed better strength than the others. Regardless of the carbon source, the porosity increased with decreasing the Si: C ratio whereas the strength increased with increasing the Si:C ratio.
引用
收藏
页码：430 / 437
页数：8
相关论文
共 50 条
  • [21] Effect of alkaline earth additives on the flexural strength of silicon oxycarbide-bonded silicon carbide ceramics
    Eom, Jung-Hye
    Kim, Young-Wook
    Jung, Byung Jun
    CERAMICS INTERNATIONAL, 2013, 39 (02) : 2083 - 2091
  • [22] Porous silicon carbide ceramics from silicon and carbon mixture
    Lee, Dong Hwa
    Kim, Jong Chan
    Kim, Deug Joong
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2013, 14 (03): : 322 - 326
  • [23] Effect of forming methods on porosity and compressive strength of polysiloxane-derived porous silicon carbide ceramics
    Eom, Jung-Hye
    Kim, Young-Wook
    Park, Chul B.
    Wang, Chunmin
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2012, 120 (1401) : 199 - 203
  • [24] Preparation and characterization of cordierite-bonded silicon carbide porous ceramics
    Lee, Jin-Seok
    Choi, Do-Mun
    Choi, Sung-Churl
    ADVANCES IN NANOMATERIALS AND PROCESSING, PTS 1 AND 2, 2007, 124-126 : 747 - +
  • [25] Effect of initial α-phase content on microstructure and flexural strength of macroporous silicon carbide ceramics
    Eom, Jung-Hye
    Kim, Young-Wook
    METALS AND MATERIALS INTERNATIONAL, 2012, 18 (02) : 379 - 383
  • [26] Processing and mechanical properties of porous silica-bonded silicon carbide ceramics
    Yong-Seong Chun
    Young-Wook Kim
    Metals and Materials International, 2005, 11 : 351 - 355
  • [27] Processing and mechanical properties of porous silica-bonded silicon carbide ceramics
    Chun, YS
    Kim, YW
    METALS AND MATERIALS INTERNATIONAL, 2005, 11 (05) : 351 - 355
  • [28] Effect of initial α-phase content on microstructure and flexural strength of macroporous silicon carbide ceramics
    Jung-Hye Eom
    Young-Wook Kim
    Metals and Materials International, 2012, 18 : 379 - 383
  • [29] Microstructure and strength of oxidation-bonded porous silicon nitride ceramics
    Ding, Shuqiang
    Zeng, Yuping
    Jiang, Dongliang
    PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 503 - 506
  • [30] Effect of SiC Filler Content on Microstructure and Flexural Strength of Highly Porous SiC Ceramics Fabricated from Carbon-Filled Polysiloxane
    Eom, Jung-Hye
    Kim, Young-Wook
    Song, In-Hyuck
    JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2012, 49 (06) : 625 - 630
12345