EFFECT OF JET-JET SPACING ON CONVECTIVE HEAT-TRANSFER TO CONFINED, IMPINGING ARRAYS OF AXISYMMETRICAL AIR-JETS

被引:242
作者
HUBER, AM [1 ]
VISKANTA, R [1 ]
机构
[1] PURDUE UNIV,SCH MECH ENGN,HEAT TRANSFER LAB,W LAFAYETTE,IN 47907
关键词
D O I
10.1016/0017-9310(94)90340-9
中图分类号
O414.1 [热力学];
学科分类号
摘要
The effects of jet-jet spacing (X(n)/D), low nozzle-plate spacings (H/D = 0.25, 1.0 and 6.0) and spent air exits located between the jet orifices were studied on the magnitude and uniformity of the convective heat transfer coefficients for confined 3 x 3 square arrays of isothermal axisymmetric air jets impinging normally to a heated surface. Local and average Nusselt numbers are presented for Reynolds number range of 3500-20 400. The local Nusselt numbers illustrate the (non) uniformity of the heat transfer and aid in understanding the variations in the average Nusselt number. The jet-jet spacing affects the convective coefficient by varying the influence of the adjacent jet interference and fraction of the impingement surface covered by the wall jet. The addition of spent air exits increased the convective coefficient and influenced the location of the optimum separation distance. In addition, significant enhancement of the uniformity and the convective coefficients was observed at H/D = 0.25 and 1.0 when compared to H/D = 6.0.
引用
收藏
页码:2859 / 2869
页数:11
相关论文
共 50 条
[31]   Heat Transfer Intensification of a Confined Impinging Air Jet Via a Guiding Baffle [J].
Maghrabie, Hussein M. ;
Attalla, M. ;
Abdelfattah, Mustafa .
ASME JOURNAL OF HEAT AND MASS TRANSFER, 2023, 145 (07)
[32]   HEAT-TRANSFER FROM A FLAT-PLATE TO A FULLY-DEVELOPED AXISYMMETRICAL IMPINGING JET [J].
LEE, D ;
GREIF, R ;
LEE, SJ ;
LEE, JH .
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1995, 117 (03) :772-776
[33]   Heat Transfer Due to an Impinging Jet in a Confined Space [J].
Nasif, G. ;
Barron, R. M. ;
Balachandar, R. .
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2014, 136 (11)
[34]   Effect of acoustic excitation on the heat transfer to an impinging air jet [J].
O'Donovan, Tadhg S. ;
Murray, Darina B. .
PROCEEDINGS OF THE ASME/JSME THERMAL ENGINEERING SUMMER HEAT TRANSFER CONFERENCE 2007, VOL 3, 2007, :183-191
[35]   Fluid flow and convective heat transfer of combined swirling and straight impinging jet arrays [J].
Wannassi, M. ;
Monnoyer, F. .
APPLIED THERMAL ENGINEERING, 2015, 78 :62-73
[36]   LOCAL CONVECTIVE HEAT-TRANSFER FROM A HEATED SURFACE TO AN IMPINGING, PLANAR JET OF WATER [J].
VADER, DT ;
INCROPERA, FP ;
VISKANTA, R .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1991, 34 (03) :611-623
[37]   CFD analysis of heat transfer enhancement in impinging jet array by varying number of jets and spacing [J].
Rachdi, Zakia ;
Hnaien, Nidhal ;
Eladeb, Aboulbaba ;
Alshammari, Badr M. ;
Kolsi, Lioua ;
Dhahri, Hacen .
SCIENTIFIC REPORTS, 2025, 15 (01)
[38]   HEAT-TRANSFER FROM A SQUARE SOURCE TO AN IMPINGING LIQUID JET CONFINED BY AN ANNULAR WALL [J].
BESSERMAN, DL ;
INCROPERA, FP ;
RAMADHYANI, S .
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1992, 114 (01) :284-287
[39]   EFFECT OF ENTRAINMENT ON THE HEAT-TRANSFER TO A HEATED CIRCULAR AIR-JET IMPINGING ON A FLAT SURFACE [J].
GOLDSTEIN, RJ ;
SOBOLIK, KA ;
SEOL, WS .
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1990, 112 (03) :608-611
[40]   HEAT-TRANSFER AND FLOW CHARACTERISTICS OF AN OBLIQUE TURBULENT IMPINGING JET WITHIN CONFINED WALLS [J].
ICHIMIYA, K .
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1995, 117 (02) :316-322