LOW VELOCITY TRANSVERSE IMPACT OF FILAMENT-WOUND PIPES .1. DAMAGE DUE TO STATIC AND IMPACT LOADS

被引：41
作者：
ALDERSON, KL
EVANS, KE
机构：
[1] Department of Materials Science and Engineering, University of Liverpool, Liverpool, L69 3BX
来源：
COMPOSITE STRUCTURES | 1992年 / 20卷 / 01期
关键词：
D O I：
10.1016/0263-8223(92)90010-A
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
Low velocity (up to 10 m/s) single-bounce impact and static tests have been conducted on glass-fibre reinforced filament-wound pipes in two support conditions - floor supported and end-cradled. Use of a simple backlighting technique has allowed the failure process of the pipes to be analysed and the damage area to be quantified. The failure process has two characteristic parts. Elastic behaviour ends at approximately the same load regardless of support condition with a definite failure associated with a concomitant drop in load. The process then continues with subsequent delaminations until a second major failure occurs, which is very dependent upon support condition.
引用
收藏
页码：37 / 45
页数：9
相关论文
共 15 条
[1]  
Cooper, Development, manufacture and applications of glass reinforced plastic pipes, Anti-corrosion Meth. & Mater., 25, pp. 3-10, (1978)
[2]  
Caprino, Crivelli Visconti, Di Ilio, Composite materials under low velocity impact, Comp. Struct., 2, pp. 261-271, (1984)
[3]  
Sharma, Low velocity impact tests on fibrous composite sandwich structures. Test methods and design allowables for fibrous composites, ASTM STP 734, pp. 54-70, (1981)
[4]  
Cann, The assessment of impact resistance of rigid PVC pipes — Part 1, Brit. Plast., 36, pp. 516-521, (1963)
[5]  
Cann, The assessment of impact resistance of rigid PVC pipes — Part 2, Brit. Plast., 36, pp. 579-582, (1963)
[6]  
Lloyd, Knight, Impact damage sensitivity of filament wound composite pressure vessels, Presented at the JANNAF Meeting, (1986)
[7]  
Christoforou, Swanson, Ventrello, Beckwith, Impact damage in carbon/epoxy composite cylinders, 32nd Annual SAMPE Symposium, pp. 964-973, (1987)
[8]  
Christoforou, Swanson, Strength loss in composite cylinders under impact, Transactions of the ASME, 110, pp. 180-184, (1988)
[9]  
Hodgkinson, Vlachos, Whitelaw, Williams, Drop-weight impact tests with the use of laser-doppler velocimetry, Proc. R. Soc. Lond., 379 A, pp. 133-144, (1982)
[10]  
Peraro, Prediction of end-use impact resistance of composites. Instrumented impact testing of plastics and composite materials, ASTM STP 936, pp. 187-216, (1987)
12