CHARACTERIZATION OF OBLIQUELY DEPOSITED TUNGSTEN/SILICON MULTILAYERS

被引:2
|
作者
MAJKOVA, E
LUBY, S
JERGEL, M
SENDERAK, R
GEORGE, B
VAEZZADEH, M
GHANBAJA, J
机构
[1] SLOVAK ACAD SCI,INST PHYS ELECTR,92101 PIESTANY,SLOVAKIA
[2] UNIV NANCY 1,PHYS SOLIDE LAB,F-54506 VANDOEUVRE NANCY,FRANCE
[3] UNIV NANCY 1,SERV COMMUN MICROSCOPIE ELECTR,F-54506 VANDOEUVRE NANCY,FRANCE
关键词
D O I
10.1016/0040-6090(94)90070-1
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
W/Si multilayers (MLs) with periods 6.6-15 nm were evaporated both perpendicularly and obliquely at incident angles 20 degrees and 40 degrees to the normal. MLs were deposited at 70-100 degrees C onto oxidized silicon. The samples were-studied by TEM, CS-TEM, SAXD and resistometry in the temperature range 1.5-300 K. Experimental data were completed by simulation of the SAXD spectra. The MLs were found to be amorphous and superconducting with T-c less than or equal to 2.84 K. With increasing angle of deposition the thickness of the intermixed regions at the interfaces decreased and the roughness of the interfaces increased. The reflectivity of MLs was practically independent of the deposition; angle, probably due to the mutual compensation of the two above-mentioned effects. 2D-3D crossover in the weak localization and interaction behaviour observed in the temperature range T-c-30 K correlates with the pure amorphous Si layer thickness reduced due to the mutual penetration of W and Si at perpendicular deposition as well as at oblique deposition for the incident angle 20 degrees.
引用
收藏
页码:295 / 301
页数:7
相关论文
共 50 条
  • [31] Optimisation of obliquely sputter deposited media
    Bijker, MD
    Visser, EM
    Lodder, JC
    Popma, TJA
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 1999, 193 (1-3) : 352 - 356
  • [32] Characterization of molybdenum/silicon X-ray multilayers
    Nayak, M
    Modi, MH
    Lodha, GS
    Shrivastava, AK
    Tripathi, P
    Sinha, AK
    Sawhney, KJS
    Nandedkar, R
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2003, 199 : 128 - 132
  • [33] Stress reduction of molybdenum/silicon multilayers deposited by ion-beam sputtering
    Shiraishi, M
    Ishiyama, W
    Oshino, T
    Murakami, K
    EMERGING LITHOGRAPHIC TECHNOLOGIES IV, 2000, 3997 : 620 - 627
  • [34] VAPOR-DEPOSITED TUNGSTEN AS A METALLIZATION AND INTERCONNECTION MATERIAL FOR SILICON DEVICES
    SHAW, JM
    AMICK, JA
    RCA REVIEW, 1970, 31 (02): : 306 - &
  • [35] STRUCTURAL CHARACTERIZATION OF SILICON - LPCVD TUNGSTEN INTERFACES
    BRAVMAN, JC
    PAINE, DC
    JOURNAL OF ELECTRON MICROSCOPY TECHNIQUE, 1987, 7 (02): : 138 - 139
  • [36] Characterization of Te/Zn/Te ... Multilayers deposited by RF-sputtering
    Bellakhder, H
    Debbagh, F
    Outzourhit, A
    Bennouna, A
    Brunel, M
    Ameziane, EL
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 1997, 45 (04) : 361 - 368
  • [37] Characterization of sputter deposited Au/Ni/Al multilayers on Si substrates
    Resnik, D.
    Vrtacnik, D.
    Aljancic, U.
    Mozek, M.
    Zalar, A.
    Amon, S.
    VACUUM, 2009, 84 (01) : 224 - 227
  • [38] CHARACTERIZATION OF SPUTTER DEPOSITED INCONEL CARBON X-RAY MULTILAYERS
    AOUADI, MS
    PARSONS, RR
    WONG, PC
    MITCHELL, KAR
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1993, 11 (01): : 115 - 124
  • [39] Electrochemical characterization of polyelectrolyte multilayers deposited at liquid-liquid interfaces
    Slevin, CJ
    Malkia, A
    Liljeroth, P
    Toiminen, M
    Kontturi, K
    LANGMUIR, 2003, 19 (04) : 1287 - 1294
  • [40] Characterization of sputter-deposited multilayers of Ni and Zr with APFIM/TAP
    Hahn-Meitner-Inst Berlin GmbH, Berlin, Germany
    Applied Surface Science, 1996, 94-95 : 306 - 312