DETERMINATION OF GEAR TOOTH FRICTION BY DISK MACHINE

被引：15

作者：

JOHNSON, KL

SPENCE, DI

机构：

[1] University Engineering Laboratory, Cambridge, CB2 1PZ, Trumpington Street

来源：

TRIBOLOGY INTERNATIONAL | 1991年 / 24卷 / 05期

关键词：

FRICTION; GEARS; GEAR TEETH; GROUND DISKS;

D O I：

10.1016/0301-679X(91)90029-9

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The friction between the teeth of a pair of hardened and ground spur gears has been measured in a back-to-back test rig. The results are compared with friction measurements using a disc machine under comparable conditions of load, speed and temperature. Close agreement was found with discs which had been transversely ground (like the gear teeth); circumferentially ground discs to the same finish gave on average 23% higher friction.

引用

页码：269 / 275

页数：7

共 4 条

[1]

Merrit, Worm gear performance, ARCHIVE: Proceedings of the Institution of Mechanical Engineers 1847-1982 (vols 1-196), 129, (1935)

[2]

Jefferis, Johnson, Sliding friction between lubricated rollers, ARCHIVE: Proceedings of the Institution of Mechanical Engineers 1847-1982 (vols 1-196), 182, (1968)

[3]

Evans, Johnson, The influence of surface roughness on EHD traction, Proc. Inst. Mech. Engrs, London, 201, (1989)

[4]

Bair, Winer, Regimes of traction of concentrated contact lubrication, Journal of Lubrication Technology, 10, (1982)

← 1 →