TRIBOLOGICAL PROPERTIES OF RF-SPUTTERED TI-B-N COATINGS UNDER VARIOUS PIN-ON-DISC WEAR TEST CONDITIONS

被引：51

作者：

BROSZEIT, E ^{[1
]}

MATTHES, B ^{[1
]}

HERR, W ^{[1
]}

KLOOS, KH ^{[1
]}

机构：

[1] TH DARMSTADT,INST MAT SCI,GRAFENSTR 2,W-6100 DARMSTADT,GERMANY

来源：

SURFACE & COATINGS TECHNOLOGY | 1993年 / 58卷 / 01期

关键词：

D O I：

10.1016/0257-8972(93)90171-J

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

TiN, Ti(B,N) and TiB2 hard coatings have been deposited on steel substrates by means of r.f. sputtering. The fundamental coating properties, such as the structure, adhesion, hardness, internal stresses and chemical composition, have been determined. The coatings have been tested with regard to their tribological behaviour by means of unlubricated pin-on-disc model wear tests under an ambient atmosphere as well as under vacuum conditions. Balls made of ball bearing steel and high speed steel have been used as pin materials. It was found that the dominant type of chemical bonding within the film is an important coating property with regard to the wear behaviour under pin-on-disc test conditions. It is shown that TiB2 films are of limited benefit in a sliding contact against steel. Ti(B,N) and the well-known TiN are much more promising coating materials.

引用

页码：29 / 35

页数：7

共 9 条

[1] MULTILABORATORY TRIBOTESTING - RESULTS FROM THE VERSAILLES ADVANCED MATERIALS AND STANDARDS PROGRAM ON WEAR TEST METHODS [J].

CZICHOS, H ;

BECKER, S ;

LEXOW, J .

WEAR, 1987, 114 (01) :109-130

[2]

Czichos H., 1982, REIBUNG VERSCHLEISS

[3] FUNDAMENTAL PROPERTIES AND WEAR-RESISTANCE OF RF-SPUTTERED TIB2 AND TI(B,N) COATINGS [J].

HERR, W ;

MATTHES, B ;

BROSZEIT, E ;

KLOOS, KH .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 140 :616-624

[4] MATERIAL SELECTION FOR HARD COATINGS [J].

HOLLECK, H .

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1986, 4 (06) :2661-2669

[5] ANALYSIS OF RF-SPUTTERED TIB2 HARD COATINGS BY MEANS OF X-RAY-DIFFRACTOMETRY AND AUGER-ELECTRON SPECTROSCOPY [J].

LOHMANN, R ;

OSTERSCHULZE, E ;

THOMA, K ;

GARTNER, H ;

HERR, W ;

MATTHES, B ;

BROSZEIT, E ;

KLOOS, KH .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 139 :259-263

[6] FUNDAMENTAL AND TRIBOLOGICAL PROPERTIES OF R F SPUTTERED TIN COATINGS IN PLASTIC MANUFACTURING MODEL WEAR TESTS [J].

MATTHES, B ;

BROSZEIT, E ;

KLOOS, KH .

SURFACE & COATINGS TECHNOLOGY, 1990, 43-4 (1-3) :688-698

[7] CORROSION PERFORMANCE OF SOME TITANIUM-BASED HARD COATINGS [J].

MATTHES, B ;

BROSZEIT, E ;

AROMAA, J ;

RONKAINEN, H ;

HANNULA, SP ;

LEYLAND, A ;

MATTHEWS, A .

SURFACE & COATINGS TECHNOLOGY, 1991, 49 (1-3) :489-495

[8] TRIBOLOGICAL BEHAVIOR AND CORROSION PERFORMANCE OF TI-B-N HARD COATINGS UNDER PLASTIC MANUFACTURING CONDITIONS [J].

MATTHES, B ;

BROSZEIT, E ;

KLOOS, KH .

SURFACE & COATINGS TECHNOLOGY, 1993, 57 (2-3) :97-104

[9]

MATTHES B, 1992, 2000 P TRIB

← 1 →