MODAL-ANALYSIS OF MULTISTAGE GEAR SYSTEMS COUPLED WITH GEARBOX VIBRATIONS

被引：29

作者：

CHOY, FK

RUAN, YF

TU, YK

ZAKRAJSEK, JJ

TOWNSEND, DP

机构：

[1] Department of Mechanical Engineering, University of Akron, Akron, OH

[2] National Aeronautics and Space Administration, Lewis Research Center, Cleveland, OH

来源：

JOURNAL OF MECHANICAL DESIGN | 1992年 / 114卷 / 03期

关键词：

D O I：

10.1115/1.2926577

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper presents an analytical procedure to simulate vibrations in gear transmission systems. This procedure couples the dynamics of the rotor-bearing gear system with the vibration in the gearbox structure. The modal synthesis method is used in solving the overall dynamics of the system, and a variable time-stepping integration scheme is used in evaluating the global transient vibration of the system. Locally each gear stage is modelled as a multimass rotor-bearing system using a discrete model. The modal characteristics are calculated using the matrix-transfer technique. The gearbox structure is represented by a finite element model, and modal parameters are solved by using NASTRAN. The rotor-gear stages are coupled through nonlinear compliance in the gear mesh while the gearbox structure is coupled through the bearing supports of the rotor system. Transient and steady state vibrations of the coupled system are examined in both time and frequency domains. A typical three-geared system is used as an example for demonstration of the developed procedure.

引用

页码：486 / 497

页数：12

共 14 条

[1] August R., Kasuba R., Torsional Vibrations and Dynamic Loads in a Basic Planetary Gear System, ASME Journal of Vibration, Acoustics, and Reliability in Design, 108, 3, pp. 348-353, (1986)
[2] Boyd L.S., Pike J.A., Epicyclic Gear Dynamics, AIAA Journal, 27, 5, pp. 603-609, (1987)
[3] Choy F.K., Li W.H., Frequency Component and Modal Synthesis Analysis of Large Rotor/Bearing Systems with Base Motion Induced Excitations, Journal of the Franklin Institute, 323, 2, pp. 145-168, (1987)
[4] Choy F.K., Padovan J., Li W., Rub in High Performance Turbomachinery, Modelling, Solution Methodology, and Signature Analysis, Mechanical Systems and Signal Processing, 2, 2, pp. 113-133, (1988)
[5] Choy F.K., Townsend D.P., Oswald F.B., Dynamic Analysis of Multimesh-Gear Helicopter Transmissions, (1988)
[6] Choy F.K., Tu Y.K., Savage M., Townsend D.P., Vibration Signature Analysis of Multistage Gear Transmission, Fifth International Power Transmission and Gearing Conference, 1, pp. 383-390, (1989)
[7] Choy F.K., Tu Y.K., Zakrajsek J.J., Townsend D.P., Dynamics of Multigear Transmission with Effects of Gearbox Vibrations, Proceedings of the 1990 CSME Mechanical Engineering Forum, 2, pp. 265-270, (1990)
[8] Cornell R.W., Compliance and Stress Sensitivity of Spur Gear Teeth, ASME Journal of Mechanical Design, 103, 2, pp. 447-459, (1981)
[9] David J.W., Park N., The Vibration Problem in Gear Coupled Rotor Systems, 11Th ASME Vibrations and Noise Conference, (1987)
[10] David J.W., Mitchell L.D., Daws J.W., Using Transfer Matrices for Parametric System Forced Response, ASME Journal of Vibration, Acoustics, Stress, and Reliability in Design, 109, 4, pp. 356-360, (1988)

← 1 2 →