A METHOD FOR ESTIMATION OF GROUND LAYERED SYSTEMS FOR THE CONTROL OF STEEL PIPE PILE GROUP DRIVING

被引:0
|
作者
MATSUO, M [1 ]
SUGAI, M [1 ]
YAMADA, E [1 ]
机构
[1] NAGOYA UNIV,DEPT CIVIL ENGN,CHIKUSA KU,NAGOYA 46401,JAPAN
关键词
BEARING CAPACITY; CONSTRUCTION; CONTROL; DYNAMIC DESIGN METHOD; GROUND LAYERED SYSTEM; PILE DRIVING; RELIABILITY ANALYSIS;
D O I
10.1016/0167-4730(94)90007-8
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
A new method for the estimation of ground layered systems, which is to suggest the dynamic design method of steel pipe pile groups, is proposed, in a probabilistic manner. The distinctive features of the method are as follows: (1) The method is safer and easier than other methods, as it needs only a general soil boring investigation prior to, and measurement of blow count data during, the pile driving. (2) Not only is the pile bearing capacity estimated, but the accuracy of the estimation can be evaluated. (3) Attention is given to the regulation of sedimentation layers from the geological point of view. (4) It can make a higher accurate estimation than a current design method. Real ground layered systems are estimated by the method, and it becomes clear that the variation of pile bearing capacities, and of the uncertainty of these, cannot be ignored even within one site. A chart, to use the arrangement of the variations, is also provided. Its applicability is examined by real pile driving data, and it becomes clear, that the effect of the magnitude of bearing capacity, and also the accuracy of the estimation to the design alteration, is well presented in the chart.
引用
收藏
页码:61 / 80
页数:20
相关论文
共 50 条
  • [31] Measurements of induced vibrations due to steel pipe pile driving in Al-Fao soil: Effect of partial end closure
    Saher, Hamed S.
    Al-Jubair, Haider S.
    Ali, Jaafar K.
    OPEN ENGINEERING, 2024, 14 (01):
  • [32] Study on the structure parameters and design method optimization of blade-type screw steel pipe pile
    Zhang, Xianjiang
    Li, Jianhua
    HELIYON, 2024, 10 (15)
  • [33] Dynamic load test method by hitting the inner bottom of close-ended steel pipe pile
    Fujisawa, H.
    Yamashita, D.
    Kanehira, Y.
    Arai, M.
    Kitamura, K.
    Kuwabara, F.
    Matsumoto, T.
    APPLICATION OF STRESS-WAVE THEORY TO PILES: SCIENCE, TECHNOLOGY AND PRACTICE, 2008, : 159 - 164
  • [34] DEFORMATION CHARACTERISTICS OF IMPROVED GROUND BY SAND COMPACTION PILE METHOD USING IRON AND STEEL SLAG
    Kinoshita, H.
    Ichii, K.
    Takahashi, Y.
    Shinozaki, H.
    GEOTECHNICAL ENGINEERING FOR DISASTER MITIGATION AND REHABILITATION 2011/GEOTECHNICAL AND HIGHWAY ENGINEERING - PRACTICAL APPLICATIONS, CHALLENGES AND OPPORTUNITIES, 2011, : 494 - 499
  • [35] DEVELOPMENT OF NUMERICAL CONTROL ROLLING METHOD FOR SEAMLESS STEEL PIPE.
    Anon
    1600,
  • [36] Research on overall stability of steel pipe pile group with lateral displacement under dynamic top-down excavation
    Wang Z.
    Yang X.
    Zhao Y.
    Zhang R.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2021, 42 : 492 - 504
  • [37] Stability Analysis of Steel Pipe Pile Reinforced Inhomogeneous Slope by Using Strength Reduction Finite Element Method
    Shi Baotong
    Kong Xiangxing
    ADVANCES IN ANALYSIS AND DESIGN OF DEEP FOUNDATIONS, 2018, : 59 - 64
  • [38] Analytical solution for settlement of group piles in layered ground based on shear displacement method
    Gao, Meng
    Gao, Guang-Yun
    Yang, Cheng-Bin
    Feng, Shi-Jin
    Ji, Yu-Jun
    Yantu Lixue/Rock and Soil Mechanics, 2010, 31 (04): : 1072 - 1077
  • [39] Analytical solution for settlement of group piles in layered ground based on shear displacement method
    Gao Meng
    Gao Guang-yun
    Yang Cheng-bin
    Feng Shi-jin
    Ji Yu-jun
    ROCK AND SOIL MECHANICS, 2010, 31 (04) : 1072 - 1077
  • [40] Estimation Method of Wall Thinning of Carbon Steel Pipe Using Nonlinearity of Magnetic Saturation
    Baek, Myung Ki
    Chai, Jangbom
    Kim, Young Sun
    Lee, Ki Sik
    Park, Il Han
    IEEE TRANSACTIONS ON MAGNETICS, 2012, 48 (11) : 3969 - 3972