DEVELOPMENT OF FUZZY STATE CONTROLLER AND ITS APPLICATION TO A HYDRAULIC POSITION SERVO

By combining control theory and fuzzy set theory, a new kind of state controller is proposed. Full order feedback and membership functions, which utilize the experience of experts, are used in the design of the state controller which we call a fuzzy state controller. Hydraulic position servos with a nonsymmetrical cylinder are commonly used in industry. This kind of system is nonlinear in nature and generally difficult to control. For different ending position, moving direction, strokes, and load the system dynamics is totally different. Once the above-mentioned parameters of the system are known, it is relatively straightforward to tune the gains of state controller to obtain good dynamic response. But when these parameters change, especially in case of the load, using the same gains will cause overshoot or even loss of system stability. Adaptive control is not applicable in this case due to the complexity of the algorithm, its rate of convergence, and the fast response characteristic of the system. The fuzzy state controller has been successfully applied to a hydraulic position servo. The system shows excellent robustness against variations of system parameters.