FREQUENCY-DEPENDENCE OF LOSS-IMPROVEMENT OF GRAIN-ORIENTED SILICON STEELS BY LASER SCRIBING

被引:9
作者
WEIDENFELLER, B
RIEHEMANN, W
机构
[1] Institut für Werkstoffkunde und Werkstofftechnik, D-38678 Clausthal-Zellerfeld
关键词
D O I
10.1016/0304-8853(94)90518-5
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Dynamical hysteresis loops of unscribed and laser scribed grain oriented silicon steels were measured in the frequency range from 0.05 to 500 Hz for polarizations from 1.4 to 1.7 T to determine frequency dependent loss improvement. For low frequencies the plot of fractional loss change show increased power losses due to laser scribing. However by increasing the frequency the fractional loss change is decreased until an optimum in relative loss reduction is reached, dependent on laser treatment. The loss change due to laser scribing depending on frequency can be explained by the assumption that the number of movable domains is increased by the same amount for all frequencies.
引用
收藏
页码:177 / 179
页数:3
相关论文
共 50 条
[41]   Reduction of iron loss in thin grain-oriented silicon steel sheets [J].
Nakano, M ;
Ishiyama, K ;
Arai, KI ;
Fukunaga, H .
IEEE TRANSACTIONS ON MAGNETICS, 1997, 33 (05) :3754-3756
[42]   DEVELOPMENT OF LASER-IRRADIATED ULTRALOW-CORE LOSS GRAIN-ORIENTED SILICON STEEL. [J].
Ichiyama, Tadashi ;
Yamaguchi, Shigehiro ;
Nakamura, Motoharu ;
Iwasaki, Masaru ;
Iuchi, Tohru .
Research and Development in Japan Awarded the Okochi Memorial Prize, 1985, :17-20
[43]   Temperature Dependence of Lancet Domains in Grain-Oriented Fe-3%Si Steels [J].
Iwata, Keiji ;
Suzuki, Masahiko ;
Hashimoto, Michihiko ;
Ueda, Masato ;
Matuoka, Yoshiaki ;
Yasue, Tsuneo ;
Koshikawa, Takanori ;
Kotsugi, Masato ;
Ohkochi, Takuo ;
Kinoshita, Toyohiko ;
Watanabe, Yoshio ;
Ishiyama, Kazushi .
IEEE TRANSACTIONS ON MAGNETICS, 2015, 51 (11)
[44]   IMPROVEMENT OF MAGNETIC PROPERTIES BY Cu ADDITION IN GRAIN-ORIENTED SILICON STEEL. [J].
Sakai, Tomohiko ;
Shimazu, Takahide ;
Chikuma, Kentaro ;
Tanino, Mitsuru ;
Matsuo, Munetsugu .
1600, (70)
[45]   Iron Loss Influenced by Magnetic Annealing in 0.1-mm-Thick Grain-Oriented High-Silicon Steels [J].
Soh, Joon-Young ;
Shin, Koo-Yong ;
Jung, Heejong ;
Kim, Sang-Beom .
IEEE TRANSACTIONS ON MAGNETICS, 2011, 47 (10) :3208-3211
[46]   IMPROVEMENT OF MAGNETIC-PROPERTIES BY CU ADDITION IN GRAIN-ORIENTED SILICON STEEL [J].
SAKAI, T ;
SHIMAZU, T ;
CHIKUMA, K ;
TANINO, M ;
MATSUO, M .
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 70 (15) :2049-2056
[47]   Surface treatment and its influence on iron loss of grain-oriented silicon steel [J].
Hu, Shou-Tian ;
Kong, Xiang-Hua ;
Wang, Xiang-Xin ;
Zhao, Qi-Bo ;
Li, Ping-He ;
Yang, Hao ;
He, Ye-Dong .
Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2010, 31 (04) :137-140
[48]   Loss and Noise Analysis of Transformer Comprising Grooved Grain-Oriented Silicon Steel [J].
Takajo, S. ;
Ito, T. ;
Omura, T. ;
Okabe, S. .
IEEE TRANSACTIONS ON MAGNETICS, 2017, 53 (09)
[49]   Effects of DC bias on magnetic performance of high grades grain-oriented silicon steels [J].
Ma, Guang ;
Cheng, Ling ;
Lu, Licheng ;
Yang, Fuyao ;
Chen, Xin ;
Zhu, Chengzhi .
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2017, 426 :575-579
[50]   Residual deformation analysis of grain-oriented silicon steel sheets with lowered core loss by using laser processing [J].
Xie, Huimin ;
Zou, Dqing ;
Li, Jindong ;
Sun, Shouguang ;
Li, Xuchang ;
Dai, Fulong ;
Zhang, Wei .
Guangxue Jishu/Optical Technique, 1999, (03) :19-21