STUDY ON HEAT-TRANSFER OF HEAT-EXCHANGERS IN THE STIRLING ENGINE - (HEAT-TRANSFER IN A HEATED TUBE UNDER THE PERIODICALLY REVERSING FLOW CONDITION)

被引:14
作者
KANZAKA, M [1 ]
IWABUCHI, M [1 ]
机构
[1] MITSUBISHI HEAVY IND CO LTD,ADV TECHNOL RES CTR,KANAZAWA KU,YOKOHAMA 236,JAPAN
来源
JSME INTERNATIONAL JOURNAL SERIES II-FLUIDS ENGINEERING HEAT TRANSFER POWER COMBUSTION THERMOPHYSICAL PROPERTIES | 1992年 / 35卷 / 04期
关键词
STIRLING ENGINE; HEAT EXCHANGER; HEAT TRANSFER; FORCED CONVECTION; UNSTEADY FLOW;
D O I
10.1299/jsmeb1988.35.4_641
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Heat transfer characteristics in heated tubes under periodically reversing flow conditions have been experimentally investigated, using a test apparatus that simulates heat exchangers for an actual Stirling engine. It is shown that the heat transfer characteristics under these conditions are greatly affected by the piston phase difference that generates the reversing flow of working fluid, and this phenomenon is peculiar to heat transfer under periodically reversing flow, which is different from the conventional convective heat transfer under steady flow. The experimental correlation for the heat transfer coefficient under these conditions is induced through the use of the working gas velocity evaluated from the Schmidt cycle model, which is one of the ideal Stirling cycles concerning the influence of the piston phase difference.
引用
收藏
页码:641 / 646
页数:6
相关论文
共 10 条
[1]  
BANKSTON CP, 1982, T ASME, P55
[2]  
HAUSER SG, 1981, 16TH P IECEC, P1925
[3]  
HWANG MF, 1983, ASME83WAHT90 PAP
[4]  
KANZAKA M, 1982, EXPT INVESTIGATION H, P125
[5]  
MCELIGOT DM, 1965, T ASME C, V87, P67
[6]  
NAKAJIMA N, 1980, J MARINE ENG SOC JAP, P28
[7]  
Nakamura N, 1981, DE J Dent Eng, P36
[8]  
RICE G, 1983, 18TH P IECEC, P714
[9]  
YAMADA Y, 1986, HEAT EXCHANGERS STIR, P366
[10]  
YAMADA Y, 1988, T JPN SOC MECH ENG, V54, P2885