THERMAL-EXPANSION OF NEPHELINE-LEUCITE CERAMIC COMPOSITES

被引：2

作者：

OTA, T ^{[1
]}

MATSUBARA, T ^{[1
]}

TAKAHASHI, M ^{[1
]}

HIKICHI, Y ^{[1
]}

SUZUKI, H ^{[1
]}

机构：

[1] SHIZUOKA UNIV, DEPT MAT SCI, HAMAMATSU, SHIZUOKA 432, JAPAN

来源：

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN | 1995年 / 103卷 / 05期

关键词：

NEPHELINE; LEUCITE; COMPOSITE; HIGH THERMAL EXPANSION;

D O I：

10.2109/jcersj.103.523

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

High-thermal-expansion ceramics consisting of nepheline (NaAlSiO4) and leucite (KAlSi2O6) were prepared by sintering mixture of their powders. The ceramics obtained had the relative density of 70 to 90%, bending strength of 60 to 100 MPa and linear thermal expansion coefficient of 15x10(-6)/degrees C to 28x10(-6)/degrees C from room temperature to 600 degrees C. The thermal expansion coefficient of the ceramics increased with increasing leucite content.

引用

页码：523 / 524

页数：2

共 50 条

[31] The Effect of Temperature on Synthetic Nano β-Eucryptite and Alumina Ceramic Materials: Thermal Expansion, Mechanical, and Physical Properties
Abo-almaged, H. H.
Hegazy, W. H.
Sebak, M. E. M.
Khattab, R. M.
SILICON, 2023, 15 (02) : 839 - 853
[32] Thermal expansion behavior of al hybrid composite reinforced with aluminum borate whisker and magnetic ceramic particle
Li, G
Li, ZJ
Fei, WD
HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2, 2005, 280-283 : 1697 - 1700
[33] Design of higher allowable temperature range for zero thermal expansion composites considering stiffness characteristic
Wang B.
Yang Z.
Zhang Y.
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2021, 38 (01): : 279 - 286
[34] Effect of polypyrrole deposition of carbon fiber on the thermal expansion of carbon fiber-epoxy composites
Lin, JS
JOURNAL OF POLYMER RESEARCH-TAIWAN, 1999, 6 (04): : 237 - 242
[35] Effect of polypyrrole deposition of carbon fiber on the thermal expansion of carbon fiber-epoxy composites
Jeng-Shyong Lin
Journal of Polymer Research, 1999, 6 : 237 - 242
[36] One-step firing of cellulose fiber and ceramic precursors for functional electro-thermal composites
Li, Daiqi
Wang, Jinfeng
Lu, Xi
Chen, Wu
Dong, Xiongwei
Tang, Bin
Wang, Xungai
MATERIALS & DESIGN, 2019, 181
[37] Fabrication of High Strength and Low Thermal Conductivity Graphite/Ceramic Composites by Selective Laser Sintering and Gelcasting
Wu Haihua
Sun Yu
Chen Kui
Li Yafeng
LASER & OPTOELECTRONICS PROGRESS, 2019, 56 (09)
[38] SPECIFIC HEAT AND THERMAL EXPANSION OF POLYESTER COMPOSITES CONTAINING SINGLEWALL-, MULTIWALL - AND FUNCTIONALIZED CARBON NANOTUBES
Ciupagea, L.
Andrei, G.
Dima, D.
Murarescu, M.
DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURES, 2013, 8 (04) : 1611 - 1619
[39] Empirical Study on Effects of Disk Shape Filler Content and Orientation on Thermal Expansion Coefficient of PP Composites
Lee, Yong Hyun
Jeoung, Sun Kyoung
Hwang, Hyo Yeon
Lee, Seung Goo
Lee, Kee Yoon
POLYMER-KOREA, 2012, 36 (03) : 281 - 286
[40] 3D EVALUATION OF THERMAL STRESSES ON CERAMIC-METAL COMPOSITES USED AT HIGH TEMPERATURE OPERATION
Kim, Jun Woo
Kim, Namkeun
Stenfelt, Stefan
Shim, Joon Hyung
5TH IIR INTERNATIONAL CONFERENCE ON THERMOPHYSICAL PROPERTIES AND TRANSFER PROCESSES OF REFRIGERANTS (TPTPR), 2017, : 771 - 775

← 1 2 3 4 5 →