Effect of cutting edge preparation of coated tools on their performance in milling various materials

被引：64

作者：

Bouzakis, K. D. ^{[1
,2
,3
]}

Bouzakis, E. ^{[1
,2
,3
]}

Kombogiannis, S. ^{[1
,2
,3
]}

Makrimallakis, S. ^{[1
,2
,3
]}

Skordaris, G. ^{[1
,2
,3
]}

Michailidis, N. ^{[1
,2
,3
]}

Charalampous, P. ^{[1
,2
,3
]}

Paraskevopoulou, R. ^{[1
]}

M'Saoubi, R. ^{[4
]}

Aurich, J. C. ^{[5
]}

Barthelma, F. ^{[6
]}

Biermann, D. ^{[7
]}

Denkena, B. ^{[8
]}

Dimitrov, D. ^{[9
]}

Engin, S. ^{[10
]}

Karpuschewski, B. ^{[11
]}

Klocke, F. ^{[3
,12
]}

Oezel, T. ^{[2
,13
]}

Poulachon, G. ^{[14
]}

Rech, J. ^{[15
]}

Schulze, V. ^{[16
]}

Settineri, L. ^{[17
]}

Srivastava, A. ^{[18
]}

Wegener, K. ^{[19
]}

Uhlmann, E. ^{[20
]}

Zeman, P. ^{[21
]}

机构：

[1] Aristotle Univ Thessaloniki, Lab Machine Tools & Mfg Engn, Thessaloniki, Greece

[2] Ctr Res & Technol Hellas, Fraunhofer Project Ctr Coatings Mfg, Thessaloniki, Greece

[3] Fraunhofer Inst Prod Technol, Aachen, Germany

[4] Seco Tools AB, R&D Mat & Technol Dev, Fagersta, Sweden

[5] Univ Kaiserslautern, Inst Mfg Technol & Prod Syst, Kaiserslautern, Germany

[6] GFE Gesell Fertigungstech & Entwicklung Schmalkal, Schmalkalden, Germany

[7] Tech Univ Dortmund, Inst Machining Technol, Dortmund, Germany

[8] Leibniz Univ Hannover, Inst Prod Engn & Machine Tools, Hannover, Germany

[9] Univ Stellenbosch, Rapid Prod Dev Lab, Stellenbosch, South Africa

[10] Pratt & Whitney Canada Corp, Longueuil, PQ, Canada

[11] Univ Magdeburg, Inst Mfg Technol & Qual Management, Magdeburg, Germany

[12] Rhein Westfal TH Aachen, Lab Machine Tools & Prod Engn WZL, Aachen, Germany

[13] Rutgers State Univ, Piscataway, NJ USA

[14] Arts & Metiers ParisTech, LaBoMaP, Cluny, France

[15] ENISE, Lab Tribol & Syst Dynam, St Etienne, France

[16] Karlsruhe Inst Technol, Wbk Inst Prod Sci, Karlsruhe, Germany

[17] Politecn Torino, Dept Management & Prod Engn, Turin, Italy

[18] TechSolve Inc, Cincinnati, OH USA

[19] Inspire AG, Zurich, Switzerland

[20] Tech Univ Berlin, Inst Machine Tools & Factory Management, Berlin, Germany

[21] Czech Tech Univ, Res Ctr Mfg Technol, Prague, Czech Republic

来源：

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY | 2014年 / 7卷 / 03期

关键词：

Cutting; Coatings; Cutting edge preparation;

D O I：

10.1016/j.cirpj.2014.05.003

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The cutting edges of coated tools are commonly treated in separate production steps during tool manufacturing. Various methods can be employed, focusing on the cutting edge strengthening by its rounding or by more complicated geometries including chamfer and optimized tool wedge radius and angles. The efficiency of diverse cutting edge preparations on the wear behaviour of coated tools, in milling different materials, was investigated in the framework of a cooperative project of the Scientific Committee "Cutting of the International Academy for Production Engineering (CIRP). In this activity twenty academic and industrial partners were involved according to a predefined project plan. (C) 2014 CIRP.

引用

页码：264 / 273

页数：10

共 23 条

[1] The preparation of cutting edges using a marking laser [J].