Tool condition monitoring in honing process using acoustic emission signals

被引：4

作者：

Kanthababu, M. ^{[1
]}

Shunmugam, M. S. ^{[1
]}

Singaperumal, M. ^{[1
]}

机构：

[1] Indian Inst Technol Madras, Dept Mech Engn, Madras 600036, Tamil Nadu, India

来源：

INTERNATIONAL JOURNAL OF AUTOMATION AND CONTROL | 2008年 / 2卷 / 01期

关键词：

Tool Condition Monitoring; TCM; Acoustic Emission; AE; honing; cylinder liner; surface roughness;

D O I：

10.1504/IJAAC.2008.020422

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

Sensing Acoustic Emission (AE) signals from a machining process is one of the most promising methods suitable for tool condition monitoring because of its sensitivity combined with quick and high frequency response. In this work, AE signals are monitored during rough, finish and plateau honing of cylinder liner using fresh and completely worn out honing tools. AE parameters such as Root Mean Square (RMS), peak to peak, skewness and kurtosis and dominant frequency in the power spectrum are analysed. The results show that the dominant frequency in the power spectrum is very sensitive to honing tool conditions and a good correlation exists with honed surface quality. Therefore, AE signals can be used for ascertaining the honing tool performance and establishing the end of tool life.

引用

页码：99 / 112

页数：14

共 33 条

[21]

LEE J, 1993, J ENG IND-T ASME, V115, P406, DOI 10.1115/1.2901783

[22]

LI D, 1990, INT J MACH TOOL MANU, V30, P579

[23] A brief review: acoustic emission method for tool wear monitoring during turning [J].

Li, XL .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2002, 42 (02) :157-165

[24] Condition monitoring in reaming through acoustic emission signals [J].

Mathews, PG ;

Shunmugam, MS .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1999, 86 (1-3) :81-86

[25] Change of cylinder surface topography in the initial stage of engine life [J].

Pawlus, P .

WEAR, 1997, 209 (1-2) :69-83

[26]

Pollock A. A., 1989, ASM INT HDB COMMITTE, V17

[27] Analysis of acoustic emission during drilling test [J].

Quadro, AL ;

Branco, JRT .

SURFACE & COATINGS TECHNOLOGY, 1997, 94-5 (1-3) :691-695

[28] State-of-the-art methods and results in tool condition monitoring: a review [J].

Rehorn, AG ;

Jiang, J ;

Orban, PE .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2005, 26 (7-8) :693-710

[29] THE CHARACTERIZATION OF INTERNAL-COMBUSTION ENGINE BORES [J].

STOUT, KJ ;

SPEDDING, TA .

WEAR, 1982, 83 (02) :311-326

[30]

Teti R., 1989, J ENG IND, V111, P229

← 1 2 3 4 →