AN INTRODUCTION TO THE EUROPEAN HYDROLOGICAL SYSTEM - SYSTEME HYDROLOGIQUE EUROPEEN, SHE .2. STRUCTURE OF A PHYSICALLY-BASED, DISTRIBUTED MODELING SYSTEM

被引：839
作者：
ABBOTT, MB
BATHURST, JC
CUNGE, JA
OCONNELL, PE
RASMUSSEN, J
机构：
[1] SOGREAH,F-38042 GRENOBLE,FRANCE
[2] DANISH HYDRAUL INST,DK-2970 HORSHOLM,DENMARK
[3] INST HYDROL,WALLINGFORD OX10 8BB,OXON,ENGLAND
来源：
JOURNAL OF HYDROLOGY | 1986年 / 87卷 / 1-2期
关键词：
The paper forms the second part of an introduction to the SHE; a physically-based; distributed catchment modelling system produced jointly by the Danish Hydraulic Institute; the British Institute of Hydrology and SOGREAH (France) with the financial support of the Commission of the European Communities. The SHE is physically-based in the sense that the hydrological processes of water movement are modelled either by finite difference representations of the partial differential equations of mass; momentum and energy conservation; or by empirical equations derived from independent experimental research. Spatial distribution of catchment parameters; rainfall input and hydrological response is achieved in the horizontal by an orthogonal grid network and in the vertical by a column of horizontal layers at each grid square. Each of the primary processes of the land phase of the hydrological cycle is modelled in a separate component as follows: interception; by the Rutter accounting procedure; evapotranspiration; by the Penman-Monteith equation; overland and channel flow; by simplifications of the St. Venant equations; unsaturated zone flow; by the one-dimensional Richards equation; saturated zone flow; by the two-dimensional Boussinesq equation; snowmelt; by an energy budget method. Overall control of the parallel running of the components and the information exchanges between them is managed by a FRAME component. Careful attention has been devoted to a modular construction so that improvements or additional components (e.g. water quality and sediment yield) can be added in the future. Considerable operating flexibility is provided through the ability to vary the level of sophistication of the calculation mode to match the availability or quality of the data;
D O I：
10.1016/0022-1694(86)90115-0
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
15
引用
收藏
页码：61 / 77
页数：17
相关论文
共 15 条
12