Optimization of mechanical and damping properties of Mg-0.6Zr alloy by different extrusion processing

被引：54

作者：

Wang, Jingfeng ^{[1
,2
,3
]}

Wu, Zhongshan ^{[1
,2
]}

Gao, Shan ^{[1
,2
]}

Lu, Ruopeng ^{[1
,2
]}

Qin, Dezhao ^{[1
,2
]}

Yang, Wenxiang ^{[1
,2
]}

Pan, Fusheng ^{[1
,2
]}

机构：

[1] Chongqing Univ, Coll Mat Sci & Engn, Chongqing 400044, PR, Peoples R China

[2] Chongqing Univ, Natl Engn Res Ctr Magnesium Alloys, Chongqing 400044, Peoples R China

[3] Chongqing Univ, State Key Lab Mech Transmiss, Chongqing 400044, Peoples R China

来源：

JOURNAL OF MAGNESIUM AND ALLOYS | 2015年 / 3卷 / 01期

关键词：

Mg-Zr alloy; Mechanical properties; Damping capacities; Extrusion; Optimization;

D O I：

10.1016/j.jma.2015.02.001

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In this study, the optimization of mechanical and damping capacities of Mg-0.6 wt.% Zr alloys by controlling the recrystallized (DRXed) grain size under varying extrusion processing parameters including extrusion temperature T and strain rate epsilon was investigated. The relationship between the DRXed grain size and damping properties of the studied alloy was also discussed. The DRXed grain size of the as-extruded Mg-Zr alloys decreased as the extrusion temperature T decreased and the strain rate epsilon increased. As the DRXed grain size decreased, the strength and elongation of the as-extruded alloys exhibited improved performance through the grain refinement mechanism, while the damping properties deteriorated. The extrusion temperature of the Mg- Zr alloy had relatively greater effects on the mechanical and damping properties than the strain rate. The results of the present work indicate that alloys with appropriate mechanical and damping properties may be obtained from controlling the DRXed grain size by careful tailoring of the extrusion process parameters. Copyright 2015, National Engineering Research Center for Magnesium Alloys of China, Chongqing University. Production and hosting by Elsevier B.V. All rights reserved.

引用

页码：79 / 85

页数：7