A Study of the Effects of Machining Parameters on the Surface Roughness in the End-Milling Process

被引：0

作者：

Hayajneh, Mohammed T. ^{[1
]}

Tahat, Montasser S. ^{[2
]}

Bluhm, Joachim ^{[3
]}

机构：

[1] Jordan Univ Sci & Technol, Fac Engn, Ind Engn Dept, POB 3030, Irbid 22110, Jordan

[2] AlBalqa Appl Univ, Al Huson Polytech, Mech Engn Dept, Huson 21510, Jordan

[3] Univ Duisburg Essen, Inst Mech, D-45117 Essen, Germany

来源：

JORDAN JOURNAL OF MECHANICAL AND INDUSTRIAL ENGINEERING | 2007年 / 1卷 / 01期

关键词：

Surface Finish; ANOVA; Pareto Chart; Surface Roughness; End milling;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A set of experiments designed to begin the characterization of surface quality for the end-milling process have been performed. The objective of this study is to develop a better understanding of the effects of spindle speed, cutting feed rate and depth of cut on the surface roughness and to build a multiple regression model. Such an understanding can provide insight into the problems of controlling the finish of machined surfaces when the process parameters are adjusted to obtain a certain surface finish. The model, which includes the effect of spindle speed, cutting feed rate and depth of cut, and any two-variable interactions, predicted the surface roughness values with an accuracy of about 12%. (C) 2007 Jordan Journal of Mechanical and Industrial Engineering. All rights reserved.

引用

页码：1 / 5

页数：5

共 50 条

[21] Application of Regression and ANN Techniques for Modeling of the Surface Roughness in End Milling Machining Process
Zain, Azlan Mohd
Haron, Habibollah
Sharif, Safian
2009 THIRD ASIA INTERNATIONAL CONFERENCE ON MODELLING & SIMULATION, VOLS 1 AND 2, 2009, : 188 - +
[22] Optimization of dry machining parameters for high-purity graphite in end-milling process by artificial neural networks: A case study
Shie, Jie-Ren
MATERIALS AND MANUFACTURING PROCESSES, 2006, 21 (08) : 838 - 845
[23] Optimization of Machining Parameters in Milling Process of Inconel 718 under Surface Roughness Constraints
Wu, Tian-Yau
Lin, Chi-Chen
APPLIED SCIENCES-BASEL, 2021, 11 (05): : 1 - 15
[24] Influence of Cutting Parameters to Surface Area Roughness in Dimple Machining Using Milling Process
Hanafiah, M. A.
Aziz, A. A.
Yusoff, A. R.
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2021, 18 (03) : 9094 - 9100
[25] Optimization of the Surface Roughness Equation obtained by Al7136 End-Milling
Pop, Alina Bianca
Titu, Mihail Aurel
MODERN TECHNOLOGIES IN MANUFACTURING (MTEM 2017 - AMATUC), 2017, 137
[26] Optimization of surface roughness in an end-milling operation using nested experimental design
Patel K.
Batish A.
Bhattacharya A.
Production Engineering, 2009, 3 (4-5) : 361 - 373
[27] On-Line Surface Roughness Prediction by Using a Probabilistic Approach for End-Milling
Kayabasi, Oguz
Erturk, Senol
IEEE ACCESS, 2019, 7 : 143490 - 143498
[28] Surface roughness optimization in an end-milling operation using the Taguchi design method
Zhang, Julie Z.
Chen, Joseph C.
Kirby, E. Daniel
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 184 (1-3) : 233 - 239
[29] Evolutionary Optimization of Machining Parameters Based on Surface Roughness in End Milling of Hot Rolled Steel
Abu-Mahfouz, Issam
Banerjee, Amit
Rahman, Esfakur
MATERIALS, 2021, 14 (19)
[30] Study on the Effects of the Machining Parameters on Surface Roughness and Vibration in Milling 34CrNiMo6 Steel
Erbas, Mehmet
Gullu, Abdulkadir
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2019, 22 (03): : 633 - 639

← 1 2 3 4 5 →