FATIGUE TESTING OF A SHAPE-OPTIMIZED CIRCULAR HOLE IN A PLATE UNDER TENSILE AND BENDING LOADS

被引：5

作者：

BETHGE, K

MATTHECK, C

机构：

[1] The authors are with the Kernforschungszentrum Karlsruhe, Institut für Material- und Festkörperforschung IV

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 1990年 / 12卷 / 06期

关键词：

SHAPE OPTIMIZATION; COMPUTER SIMULATION; BIOLOGICAL STRUCTURES;

D O I：

10.1016/0142-1123(90)90221-Y

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

With the help of the CAO method a plate with a shape-optimized circular hole has been developed. Its surface stresses have been drastically reduced by attaching material at places of high local stresses and reducing material at locations of low local stresses. Fatigue tests have been performed under tensile and bending loads (to ensure the prolongation of the crack initiation phase). The tests showed that the fatigue life of the shape-optimized specimen could be extended by a factor of at least 3 for tensile loading and at least 25 for bending loading compared to the non-optimized specimen type. This result validates the method used (as an effective method of structural shape optimization).

引用

页码：489 / 492

页数：4

共 50 条

[21] Analytical studies on stress concentration due to a rectangular small hole in thin plate under bending loads
Yang, Y.
Liu, J. K.
Cai, C. W.
STRUCTURAL ENGINEERING AND MECHANICS, 2010, 36 (06) : 669 - 678
[22] Natural Boundary Element Method for Bending Problem of Infinite Plate with a Circular Opening under the Boundary Loads
Li, Shuncai
Zhuo, Shichuang
Zhang, Qiang
CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES, 2012, 84 (03): : 283 - 295
[23] Plastic collapse of a circular plate under cyclic loads
Chinh, PD
INTERNATIONAL JOURNAL OF PLASTICITY, 2003, 19 (04) : 547 - 559
[24] The General Solution of Bending of a Spherical Thin Shallow Shell with a Circular Hole at the Center under Arbitrary Transverse Loads
许剑云
叶开沅
AppliedMathematicsandMechanics(EnglishEdition), 1980, (03) : 341 - 356
[25] BENDING OF A SIMPLY SUPPORTED PLATE CLAMPED ABOUT A CENTRAL CIRCULAR HOLE
FEDOTOFF, RC
CARNEY, JF
AIAA JOURNAL, 1972, 10 (04) : 518 - &
[26] BENDING OF TRANSVERSAL ISOTROPIC PLATE WITH A CIRCULAR HOLE REINFORCED BY A MULTICOMPONENT RING
PELEKH, BL
LAZKO, VA
DOPOVIDI AKADEMII NAUK UKRAINSKOI RSR SERIYA A-FIZIKO-MATEMATICHNI TA TECHNICHNI NAUKI, 1975, (05): : 425 - 429
[27] ON THE PLASTIC BENDING OF CIRCULAR PLATES UNDER UNIFORM TRANSVERSE LOADS
TRIFAN, D
QUARTERLY OF APPLIED MATHEMATICS, 1949, 6 (04) : 417 - 427
[28] Mechanical behavior of circular hybrid braids under tensile loads
Hristov, K
Armstrong-Carroll, E
Dunn, M
Pastore, C
Gowayed, Y
TEXTILE RESEARCH JOURNAL, 2004, 74 (01) : 20 - 26
[29] Failure mode prediction of sandwich plate under bending loads
孙凌玉
陈卫卫
冯江波
JournalofBeijingInstituteofTechnology, 2011, 20 (02) : 272 - 279
[30] CALCULATION OF THE STRESS INTENSITY FACTOR OF A CIRCUMFERENTIAL CRACK IN A TUBE ORIGINATING FROM A HOLE UNDER AXIAL TENSILE AND BENDING LOADS
MATTHECK, C
MORAWIETZ, P
MUNZ, D
ENGINEERING FRACTURE MECHANICS, 1985, 22 (04) : 645 - 650

← 1 2 3 4 5 →