A Ship Design and Deployment Model for Non-Cargo Vessels Using Contract Scenarios

被引:4
|
作者
Erikstad, Stein Ove [1 ]
Fagerholt, Kjetil [2 ]
Solem, Siri [1 ]
机构
[1] Norwegian Univ Sci & Technol, Dept Marine Technol, Trondheim, Norway
[2] Norwegian Univ Sci & Technol, Dept Ind Econ & Technol Management, Trondheim, Norway
关键词
Optimisation; Ship Design;
D O I
10.1179/str.2011.58.3.001
中图分类号
U6 [水路运输]; P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
An optimisation model is proposed for the Ship Design and Deployment Problem (SDDP). This model can be used to support the development of the contract specification for non-cargo, service type of ships, facing a set of available contracts or market opportunities with different start-up periods, durations and vessel capability requirements. The proposed model is a binary integer programming (BIP) model, where the problem is to optimally select a design while at the same time considering which future contracts the vessel should be deployed in. Computational study shows that the model is able to solve the SDDP even for large problem sizes. Variants and extensions to the SDDP model are suggested including concurrent selection of multiple vessels (Fleet Design and Deployment Problem), existing initial fleet and forced contract assignment for some of the vessels. Further, generation of contracts and market opportunities for alternative future scenarios can also be considered.
引用
收藏
页码:132 / 141
页数:10
相关论文
共 50 条
  • [21] Group Decision-Making and a Design Communication Model Using Quality Function Deployment
    Chun, Jaeyoul
    Cho, Jaeho
    JOURNAL OF ASIAN ARCHITECTURE AND BUILDING ENGINEERING, 2018, 17 (01) : 95 - 102
  • [22] Design and development of automobile assembly model using federated artificial intelligence with smart contract
    Manimuthu, Arunmozhi
    Venkatesh, V. G.
    Shi, Yangyan
    Sreedharan, V. Raja
    Koh, S. C. Lenny
    INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 2022, 60 (01) : 111 - 135
  • [23] Design improvement of multifunctional seatbelt by using integrated kano model and quality function deployment
    Rizqi, Z. U.
    3RD INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY FOR SUSTAINABLE DEVELOPMENT (ICET4SD), 2020, 722
  • [24] An efficient ship autopilot design using observer-based model predictive control
    Wang, Wenxin
    Liu, Cheng
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART M-JOURNAL OF ENGINEERING FOR THE MARITIME ENVIRONMENT, 2021, 235 (01) : 203 - 212
  • [25] Design of Ship Model Dynamic Positioning System using PID-Based Microcontroller
    Zaman, Muhammad Badrus
    Kusuma, Indra Ranu
    Katilik, Alfius C.
    Semin
    Santoso, Agoes
    2019 2ND IEEE ASIA-PACIFIC CONFERENCE ON GEOSCIENCE, ELECTRONICS AND REMOTE SENSING TECHNOLOGY (AGERS): UNDERSTANDING AND FORECASTING THE DYNAMICS OF LAND, OCEAN AND MARITIME, 2019, : 49 - 56
  • [26] An early-stage design model for estimating ship evacuation patterns using the ship-centric Markov decision process
    Kana, Austin A.
    Droste, Koen
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART M-JOURNAL OF ENGINEERING FOR THE MARITIME ENVIRONMENT, 2019, 233 (01) : 138 - 149
  • [27] Design of the control software of a UUV for oceanographic monitoring using a component model and framework with flexible deployment
    Ortiz, Francisco
    Guerrero, Antonio
    Sanchez-Ledesma, Francisco
    Garcia-Cordova, Francisco
    Alonso, Diego
    Gilabert, Javier
    REVISTA IBEROAMERICANA DE AUTOMATICA E INFORMATICA INDUSTRIAL, 2015, 12 (03): : 325 - 337
  • [28] A SYSTEM TRADE MODEL FOR THE MONITORING OF COASTAL VESSELS USING HF SURFACE WAVE RADAR AND SHIP AUTOMATIC IDENTIFICATION SYSTEMS (AIS)
    Vesecky, John F.
    Laws, Kenneth E.
    Paduan, Jeffery D.
    2010 IEEE INTERNATIONAL GEOSCIENCE AND REMOTE SENSING SYMPOSIUM, 2010, : 3414 - 3417
  • [29] ShipHullGAN: A generic parametric modeller for ship hull design using deep convolutional generative model
    Khan, Shahroz
    Goucher-Lambert, Kosa
    Kostas, Konstantinos
    Kaklis, Panagiotis
    COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2023, 411
  • [30] Improvement of ship design practice using a 3D CAD model of a hull structure
    Roh, Myung-Il
    Lee, Kyu-Yeul
    Choi, Woo-Young
    Yoo, Seong-Jin
    ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2008, 24 (01) : 105 - 124