Effect of Squeeze Pressure on Microstructure, Aging and Mechanical Properties of A357/ ZrO2 Composite

被引：3
|
作者：
Abou El-Khair, M. T. [1 ]
机构：
[1] CMRDI, Composite Mat Lab, POB 87, Cairo, Egypt
来源：
INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH IN AFRICA | 2011年 / 4卷
关键词：
Metal matrix composites; AlSiMg alloy; Squeeze casting; Microstructure; T6; treatment; Mechanical properties;
D O I：
10.4028/www.scientific.net/JERA.4.59
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
AlSiMg (A357) composites containing 10 vol. % zirconia (ZrO2) particulates have been synthesized by the stir process followed by squeeze casting. Pressures of 25 and 50 MPa were maintained during solidification in specially designed die and ram and maintained at 250 degrees C. Results show that with increasing squeeze pressure, the density increases while porosity decreases. The hardness of squeeze cast composite is higher than that of stir casting by about 10%. The compression properties have been evaluated and compared. The results show that compressive strength increases with squeeze pressure.
引用
收藏
页码：59 / 66
页数：8
相关论文
共 50 条
  • [41] EFFECTS OF ZRO2 ADDITION ON MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF MOSI2
    SUZUKI, Y
    SEKINO, T
    NIIHARA, K
    SCRIPTA METALLURGICA ET MATERIALIA, 1995, 33 (01): : 69 - 74
  • [42] Microstructure and mechanical properties of nano-ZrO2/platinum composite
    Xu, Y
    Du, GY
    Li, ML
    Jiang, LJ
    Li, HJ
    RARE METAL MATERIALS AND ENGINEERING, 2004, 33 (10) : 1080 - 1083
  • [43] Mechanical properties and microstructure of LCAS-SiCw-ZrO2 composite
    Tu, Guohui
    Sun, Xiaohua
    Li, Zhangda
    Zhou, Qiulan
    Zhongnan Gongye Daxue Xuebao/Journal of Central South University of Technology, 1999, 30 (05): : 515 - 518
  • [44] Effect of ZrO2 Addition on Mechanical Properties and Microstructure of Al-9Zn-6Mg-3Si Matrix Composites Manufactured by Squeeze Casting
    Syarifudin, Muhammad
    Hale, Elisabeth Nadya
    Sofyan, Bondan Tiara
    2ND INTERNATIONAL CONFERENCE ON ROBOTICS AND MECHANTRONICS, 2019, 517
  • [45] MICROSTRUCTURE AND TRIBOLOGICAL PROPERTIES OF ZRO2 CERAMICS
    TUCCI, A
    ESPOSITO, L
    WEAR, 1994, 172 (02) : 111 - 119
  • [46] Effect of ZrO2 content on microstructure and mechanical properties of W alloys fabricated by spark plasma sintering
    Wang, Changji
    Zhang, Laiqi
    Wei, Shizhong
    Pan, Kunming
    Wu, Xiaochao
    Li, Qingkui
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2019, 79 : 79 - 89
  • [47] Effect of ZrO2 on Microstructure and Properties of Molybdenum-Rhenium Alloy
    Wang Guangda
    Ren Xueting
    Xiong Ning
    Kuang Chunjiang
    RARE METAL MATERIALS AND ENGINEERING, 2024, 53 (05) : 1355 - 1362
  • [48] Effect of ZrO2 Nanoparticles on the Microstructure and Thermophysical Properties of PEO Coating
    Li, Guo-Dong
    Qi, Shao-Bao
    Zhu, Jian-Wei
    Li, Zhi-Jie
    Ma, Fei
    Li, Guang
    Xia, Yuan
    Surface Technology, 2022, 51 (02): : 375 - 383
  • [49] Sr effect on the microstructure and tensile properties of A357 aluminum alloy and Al2O3/SiC-A357 cast composites
    Razaghian, A.
    Emamy, M.
    Najimi, A. A.
    Ebrahimi, S. H. Seyed
    MATERIALS CHARACTERIZATION, 2009, 60 (11) : 1361 - 1369
  • [50] Effect of Mechanical Milling and Sintering Parameters on the Mechanical Properties of SiC-ZrO2 Composite with a Network Microstructure
    Anggraini, L.
    Yamamoto, R.
    Fujiwara, H.
    Ameyama, K.
    JOURNAL OF CERAMIC SCIENCE AND TECHNOLOGY, 2011, 2 (03): : 139 - 145
12345