Effect of Squeeze Pressure on Microstructure, Aging and Mechanical Properties of A357/ ZrO2 Composite

被引:3
|
作者
Abou El-Khair, M. T. [1 ]
机构
[1] CMRDI, Composite Mat Lab, POB 87, Cairo, Egypt
关键词
Metal matrix composites; AlSiMg alloy; Squeeze casting; Microstructure; T6; treatment; Mechanical properties;
D O I
10.4028/www.scientific.net/JERA.4.59
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
AlSiMg (A357) composites containing 10 vol. % zirconia (ZrO2) particulates have been synthesized by the stir process followed by squeeze casting. Pressures of 25 and 50 MPa were maintained during solidification in specially designed die and ram and maintained at 250 degrees C. Results show that with increasing squeeze pressure, the density increases while porosity decreases. The hardness of squeeze cast composite is higher than that of stir casting by about 10%. The compression properties have been evaluated and compared. The results show that compressive strength increases with squeeze pressure.
引用
收藏
页码:59 / 66
页数:8
相关论文
共 50 条
  • [21] The effects of sintering additives on the ceramic matrix composite of ZrO2: microstructure, densification, and mechanical properties - a review
    Oguntuyi, S. D.
    Johnson, O. T.
    Shongwe, M. B.
    Jeje, S. O.
    Rominiyi, A. L.
    ADVANCES IN APPLIED CERAMICS, 2021, 120 (5-8) : 319 - 335
  • [22] Studying the Microstructure and Mechanical Properties of (WC - TiC - Co) /ZrO2 Composite Prepared by Powder Technology
    Abolkassem, Shimaa A.
    Elkady, Omayma A.
    Ewais, Emad M. M.
    Hussein, Walaa A.
    EGYPTIAN JOURNAL OF CHEMISTRY, 2020, 63 (04): : 1241 - 1254
  • [23] Microstructure, Mechanical Properties, and Pyroconductivity of NiFe2O4 Composite Reinforced with ZrO2 Fibers
    Jinjing Du
    Yihan Liu
    Guangchun Yao
    Zhongsheng Hua
    Xiuli Long
    Bin Wang
    Journal of Materials Engineering and Performance, 2013, 22 : 1776 - 1782
  • [24] Microstructure, Mechanical Properties, and Pyroconductivity of NiFe2O4 Composite Reinforced with ZrO2 Fibers
    Du, Jinjing
    Liu, Yihan
    Yao, Guangchun
    Hua, Zhongsheng
    Long, Xiuli
    Wang, Bin
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (06) : 1776 - 1782
  • [25] Effect of Sc on microstructure and properties of A357 alloy under different casting conditions
    Wei, Qi
    Xu, Hong
    Bai, Xiaoyu
    Lian, Peng
    Wang, Yu
    Mao, Hongkui
    Wang, Cong
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 20 : 2051 - 2059
  • [26] Microstructure and mechanical properties of ZrO2/NiCr functionally graded materials
    Jin, Xin
    Wu, Linzhi
    Sun, Yuguo
    Guo, Licheng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 509 (1-2): : 63 - 68
  • [27] Effect of Hot pressing Technology on the Microstructure and Mechanical Properties of ZrO2 Nano-composite Ceramic Tool and Die Material
    Yi, Mingdong
    Xu, Chonghai
    Zhang, Jingjie
    Jiang, Zhenyu
    ADVANCED STRUCTURAL MATERIALS, 2011, 686 : 396 - +
  • [28] Effect of ZrO2 addition on the microstructure and electromagnetic properties of YIG
    Wang, Jiaqian
    Jin, Yulong
    Yang, Jian
    Huang, Yinyin
    Qiu, Tai
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (19) : 5853 - 5857
  • [29] Mechanical properties and microstructure of ZrO2-SiO2 composite
    Wang, SW
    Huang, XX
    Guo, JK
    JOURNAL OF MATERIALS SCIENCE, 1997, 32 (01) : 197 - 201
  • [30] Microstructure, thermal behavior and mechanical properties of squeeze cast SiC, ZrO2 or C reinforced ZA27 composites
    Abou El-khair, M. T.
    Lotfy, A.
    Daoud, A.
    El-Sheikh, A. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (06): : 2353 - 2362