Influence of fibre preparation method and wood species on the VOC-emissions from MDF boards

被引：7

作者：

Gabriel, M. ^{[1
]}

Behn, C. ^{[2
]}

Roffael, Edmone ^{[3
]}

机构：

[1] Univ Goettingen, Buesgen Inst, Dept Forest Zool & Forest Conservat, D-37077 Gottingen, Germany

[2] Univ Goettingen, Buesgen Inst, Dept Mol Wood Biotechnol & Tech Mycol, D-37077 Gottingen, Germany

[3] Univ Goettingen, Buesgenweg 1, D-37077 Gottingen, Germany

来源：

INTERNATIONAL WOOD PRODUCTS JOURNAL | 2015年 / 6卷 / 02期

关键词：

Medium density fibreboards (MDF); Hardwoods; Softwoods; Volatile organic compounds (VOCs); Thermo-mechanical pulping (TMP); Chemothermo-mechanical pulping (CTMP);

D O I：

10.1179/2042645315Y.0000000002

中图分类号：

TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];

学科分类号：

0805 ; 080502 ; 0822 ;

摘要：

Emission of volatile organic compounds (VOCs) from medium density fibreboards (MDF) containing different proportions of softwoods (SW) and hardwoods (HW) was evaluated. The results reveal that decreasing the proportion of HW in MDF elevates the emission of terpenes and aliphatic aldehydes. The pulping method (TMP, CTMP) seems to have no significant influence on the emission of terpenes or aldehydes from MDF. On using the TMP process, the emission of acetic acid elevates remarkably with increasing the amount of HW in the boards. Compared with the TMP process, the CTMP process leads to a decrease of acetic acid emission at 408C with more than 15% at 35% HW content of the boards and 40% at 65% HW content.

引用

页码：79 / 83

页数：5

共 13 条

[1]

BACK E, 2000, PITCH CONTROL WOOD R, P376

[2]

Baumann MGD, 1999, FOREST PROD J, V49, P49

[3]

Baumann MGD, 2000, FOREST PROD J, V50, P75

[4]

Boland W.NeyP, 1984, ANAL VOLATILES, P371

[5] Long-term development of VOC emissions from OSB after hot-pressing [J].

Makowski, M ;

Ohlmeyer, M ;

Meier, D .

HOLZFORSCHUNG, 2005, 59 (05) :519-523

[6] ON CHEMICAL-CHANGES IN WOOD PARTICLES DURING PRESSING WITH UREA FORMALDEHYDE RESINS AS BINDER [J].

POBLETE, H ;

ROFFAEL, E .

HOLZ ALS ROH-UND WERKSTOFF, 1985, 43 (02) :57-62

[7]

Risholm-Sundman M, 1998, HOLZ ROH WERKST, V56, P125, DOI 10.1007/s001070050282

[8]

Risholm-Sundman M., 2002, TAG UMW HOLZW FACHT

[9]

Roffael E, 2006, HOLZ ROH WERKST, V64, P144, DOI 10.1007/s00107-005-0061-0

[10] ON THE SUITABILITY OF THERMOMECHANICAL AND CHEMO-THERMO-MECHANICAL PULPS (TMP AND CTMP) FROM BEECH AND PINE FOR THE MANUFACTURE OF MEDIUM DENSITY FIBERBOARDS .1. PULPING OF WOOD AND PROPERTIES OF THE PULPS [J].

ROFFAEL, E ;

DIX, B ;

BAR, G ;

BAYER, R .

HOLZ ALS ROH-UND WERKSTOFF, 1994, 52 (04) :239-246

← 1 2 →