ELASTOPLASTIC ANALYSIS OF A MODE-II FRACTURE SPECIMEN

被引：7

作者：

BANKSSILLS, L

SHERMAN, D

机构：

[1] Faculty of Engineering, Department of Mechanics, Materials and Structures, The Eda and Jaime Dreszer Fracture Mechanics Laboratory, Tel Aviv University, Ramat Aviv

来源：

INTERNATIONAL JOURNAL OF FRACTURE | 1990年 / 46卷 / 02期

关键词：

D O I：

10.1007/BF00041998

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

An elasto-plastic analysis of a compact mode II fracture specimen is performed. Both an approximate approach with rigid plastic material and a more exact elasto-plastic finite element calculation are carried out. From this analysis, an η-factor is determined relating the J-integral to the internal energy measured along the specimen crack faces. It is shown through the finite element computation that it is justifiable to define an η-factor. With this result, it is now possible to perform tests on aluminium specimens so as to determine JIIc. © 1990 Kluwer Academic Publishers.

引用

页码：105 / 122

页数：18

共 17 条

[1] AN ANALYSIS OF THE NUMERICAL PATH DEPENDENCE OF THE J-INTEGRAL
BAKKER, A
[J]. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 1983, 14 (03) : 153 - 179
[2] BAKKER A, 1983, 4TH P ADV SEM FRACT, P55
[3] COMPARISON OF METHODS FOR CALCULATING STRESS INTENSITY FACTORS WITH QUARTER-POINT ELEMENTS
Banks-Sills, L
SHERMAN, D
[J]. INTERNATIONAL JOURNAL OF FRACTURE, 1986, 32 (02) : 127 - 140
[4] BANKSSILLS L, 1986, AM SOC TEST MATER, P347
[5] BATHE KJ, 1981, ADINA AUTOMATIC DYNA
[6] BATHE KJ, 1982, FINITE ELEMENT PROCE, P492
[7] BUI HD, 1983, J MECH PHYS SOLIDS, V31, P439, DOI 10.1016/0022-5096(83)90010-8
[8] Ernst H.A., 1979, 677 ASTM STP, P581, DOI DOI 10.1520/STP34937S
[9] HELLEN TK, 1983, 3RD P INT C NUM METH, P395
[10] Ishikawa H., 1979, MECH BEHAV MAT, V3, P447

← 1 2 →