COLD CRACKING OF UNDERWATER WET WELDED S355G10+N HIGH STRENGTH STEEL

被引：20

作者：

Fydrych, D. ^{[1
]}

Labanowski, J. ^{[1
]}

Tomkow, J. ^{[1
]}

Rogalski, G. ^{[1
]}

机构：

[1] Gdansk Univ Technol, Dept Mat Sci & Welding Engn, Narutowicza 11-12, PL-80233 Gdansk, Poland

来源：

ADVANCES IN MATERIALS SCIENCE | 2015年 / 15卷 / 03期

关键词：

Underwater welding; wet welding; high strength steel; weldability; cold cracking;

D O I：

10.1515/adms-2015-0015

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Water as the welding environment determines some essential problems influencing steel weldability. Underwater welding of high strength steel joints causes increase susceptibility to cold cracking, which is an effect of much faster heat transfer from the weld area and presence of diffusible hydrogen causing increased metal fragility. The paper evaluates the susceptibility to cold cracking of the high strength S355G10+N steel used, among others, for ocean engineering and hydrotechnical structures, which require underwater welding. It has been found from the CTS test results that the investigated steel is susceptible to cold cracking in the wet welding process.

引用

页码：48 / 56

页数：9

共 49 条

[41] Experimental and numerical investigation into temperature histories and residual stress distributions of high strength steel S690 welded H-sections
Liu, Xiao
Chung, Kwok-Fai
[J]. ENGINEERING STRUCTURES, 2018, 165 : 396 - 411
[42] Influence of structure on stress corrosion cracking of high-strength 05Kh15N4M2 nitrogen-alloyed steel
Petropavlovskaya, E.N.
Kuznetsov, Ye.V.
Kharina, I.L.
[J]. Fiziko-Khimicheskaya Mekhanika Materialov, 1992, (05): : 79 - 82
[43] Forming Process Optimization of Wire and Arc Additive Manufactured High-strength Steel ER120S-G
Fang X.
Jiang X.
Wang Z.
Wu X.
Huang K.
[J]. Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2023, 34 (02): : 218 - 225
[44] Experimental and Numerical Analysis of Fracture Mechanics Behavior of Heterogeneous Zones in S690QL1 Grade High Strength Steel (HSS) Welded Joint
Tomerlin, Damir
Kozak, Drazan
Ferlic, Luka
Gubeljak, Nenad
[J]. MATERIALS, 2023, 16 (21)
[45] Lightweight design with welded high-frequency mechanical impact (HFMI) treated high-strength steel joints from S700 under constant and variable amplitude loadings
Yildirim, H. C.
Marquis, G.
Sonsino, C. M.
[J]. INTERNATIONAL JOURNAL OF FATIGUE, 2016, 91 : 466 - 474
[46] Lightweight Potential of Welded High-Strength Steel Joints from S700 under Constant and Variable Amplitude Loading by High-Frequency Mechanical Impact (HFMI) Treatment
Yildirim, Halid Can
Marquis, Gary
Sonsino, Cetin Morris
[J]. 3RD INTERNATIONAL CONFERENCE ON MATERIAL AND COMPONENT PERFORMANCE UNDER VARIABLE AMPLITUDE LOADING, VAL 2015, 2015, 101 : 467 - 475
[47] Comparison of laser welds in thick section S700 high-strength steel manufactured in flat (1G) and horizontal (2G) positions
Guo, Wei
Liu, Qiang
Francis, John A.
Crowther, Dave
Thompson, Alan
Liu, Zhu
Li, Lin
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2015, 64 (01) : 197 - 200
[48] Morphology of step-wise S-N curves depending on work-hardened layer and humidity in a high-strength steel
Nakajima, M
Tokaji, K
Itoga, H
Ko, HN
[J]. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2003, 26 (12) : 1113 - 1118
[49] Underwater additive manufacturing of 10CrNi3MoV high-strength low-alloy steel by wire-feed laser melting deposition: Effect of microstructure evolution on mechanical properties
Cheng, Qi
Guo, Ning
Fu, Yunlong
Gao, Yukai
Zhang, Xin
Zhou, Guanchen
[J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 31 : 2864 - 2875

← 1 2 3 4 5 →