CELL BEHAVIOR ON POLYMER SURFACES WITH DIFFERENT FUNCTIONAL-GROUPS

Surfaces with differently chargeable functional groups were prepared on low density polyethylene sheets by corona discharge treatment, followed by graft copolymerization of acrylic acid (-COOH, negatively chargeable) and a subsequent substitution reaction of carboxylic acid groups to hydroxyl (-CH2OH, neutral) or amide (-CONH2, neutral) groups. The amide groups grafted on the surface were further converted to amine groups (-CH2NH2, positively chargeable). The prepared surfaces were characterized by measuring the water contact angle, electron spectroscopy for Chemical analysis and Fourier-transform infrared spectroscopy in the attenuated total reflectance mode. It was observed that the wettability of the different functional group-grafted surfaces largely increases compared with the control surface but is not much affected by the kind of functional groups grafted. The interaction of Chinese hamster ovary cells with the functional group-grafted surfaces was investigated. The cells adhered and grown on the surfaces were counted using an electronic cell counter and observed by a scanning electron microscope. The surface grafted with amine groups was best for cell adhesion, spreading and growth probably owing to the positively chargeable character in aqueous cell culture medium. For surfaces grafted with neutral functional groups, the surface grafted with hydroxyl groups showed better cell spreading than that grafted with amide groups.