PRECISE AREA DETERMINATION OF SKIN-PRICK TESTS - VALIDATION OF A SCANNING DEVICE AND SOFTWARE FOR A PERSONAL-COMPUTER

When skin-prick tests (SPTs) are used quantitatively, the circumference of the weal and/or the flare is outlined using a felt tip pen, and transferred to paper by adhesive tape. The aim of the study was to develop and validate a procedure, objectively and precisely determining these areas after transfer to paper. A system was developed enabling the drawing of the area of weal or flare to be read by a hand-held scanner and calculated on a personal computer. Areas in the 5-500 mm2 range could be determined with day-to-day and interoperator coefficients of variation (CVs) of 3.1% and 1.8%, respectively. Accuracy was determined in two ways: by correlation to cutting/weighing of four times enlarged SPT areas (r2 = 0.999, P < 0.001) and by measuring standardized areas (deviations less than intra-assay CV, i.e. 1-2%). For comparison, CVs of alternative methods were also determined: eight different areas (9-76 mm2) were evaluated in quadruplicate using the SPT-scanner (CV = 1.4%), by cutting/weighing of paper (CV = 2.3%), by digitizing (CV = 4.4%) or by measuring longest and orthogonal diameters (CV = 13.6%). In conclusion, the scanning device and software provides an, objective and reproducible procedure for rapid determination of SPT areas. When areas are determined by scanning, digitizing or cutting/weighing the variations in area determination becomes negligible compared to the variations of the entire skin test procedure.