A FOURIER-ANALYSIS AND DYNAMIC OPTIMIZATION OF THE PETROV-GALERKIN FINITE-ELEMENT METHOD

被引:3
|
作者
CARRANO, CS [1 ]
YEH, G [1 ]
机构
[1] PENN STATE UNIV,DEPT CIVIL & ENVIRONM ENGN,UNIVERSITY PK,PA 16802
关键词
PETROV-GALERKIN METHODS; WEIGHTING PARAMETERS; OPTIMIZATION; SPECTRAL AVERAGED PHASE ERRORS;
D O I
10.1002/nme.1620382404
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A Fourier analysis of the linear and quadratic N + 1 and N + 2 Petrov-Gaterkin finite element methods applied to the one-dimensional transient convective-diffusion equation is performed. The results show that a priori optimization of the N + 1 method is not possible because dissipative errors are introduced as dispersive errors are reduced (any optimization is subjective). However, a priori optimization of the N + 2 Petrov-Galerkin method is possible because the reduction of dispersion errors can be accomplished without the addition of artificial dissipation. The Spectrally Weighted Average Phase Error Method (SWAPEM) for the optimization of the N + 2 Petrov-Galerkin method is introduced, in which the N + 2 weighting parameter is chosen at each time step to minimize the integral over wave number of the phase error of Fourier modes, weighted by the frequency content of the global solution at the previous time step (obtained via FFT). The method is dynamic, and general in that the dependence of the weighting parameter on the solution waveform is accounted for. Optimal values predicted by the method are in excellent agreement with those suggested by the numerical experimentation of others. Simulations of the pure convective transport of a Gaussian plume and a triangle wave are discussed to illustrate the effectiveness of the method.
引用
收藏
页码:4123 / 4155
页数:33
相关论文
共 50 条
  • [41] The application of finite-element analysis in the design of thick-film hybrid circuits
    Zarnik, MS
    INFORMACIJE MIDEM-JOURNAL OF MICROELECTRONICS ELECTRONIC COMPONENTS AND MATERIALS, 2002, 32 (01): : 14 - 21
  • [42] Finite-Element Analysis of a Varying-Width Bistable Piezoelectric Energy Harvester
    Kumar, Tarun
    Kumar, Rajeev
    Chauhan, Vishal S.
    Twiefel, Jens
    ENERGY TECHNOLOGY, 2015, 3 (12) : 1243 - 1249
  • [43] Identification of mechanical parameters of urea-formaldehyde microcapsules using finite-element method
    Wang, X. F.
    Han, R.
    Tao, J.
    Han, T. L.
    Zhu, G. M.
    Tang, J. N.
    Han, N. X.
    Xing, F.
    COMPOSITES PART B-ENGINEERING, 2019, 158 : 249 - 258
  • [44] An automatic approach for calibrating dielectric bone properties by combining finite-element and optimization software tools
    Su, Yukun
    Kluess, Daniel
    Mittelmeier, Wolfram
    van Rienen, Ursula
    Bader, Rainer
    COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 2016, 19 (12) : 1306 - 1313
  • [45] Design Optimization of Magnetic Gears Using Mesh Adjustable Finite-Element Algorithm for Improved Torque
    Niu, Shuangxia
    Chen, Ningning
    Ho, S. L.
    Fu, W. N.
    IEEE TRANSACTIONS ON MAGNETICS, 2012, 48 (11) : 4156 - 4159
  • [46] Shaped Beam Synthesis of Real Antenna Arrays via Finite-Element Method, Floquet Modal Analysis, and Convex Programming
    Ignacio Echeveste, J.
    Gonzalez de Aza, Miguel A.
    Zapata, Juan
    IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 2016, 64 (04) : 1279 - 1286
  • [47] Axially laminated reluctance motor: Analytical and finite-element methods for magnetic analysis
    Bianchi, N
    Chalmers, BJ
    IEEE TRANSACTIONS ON MAGNETICS, 2002, 38 (01) : 239 - 245
  • [48] Energy dissipation of pulsating bubbles in compressible fluids using the Eulerian finite-element method
    Tian, Zhao-Li
    Liu, Yun-Long
    Zhang, A-Man
    Tao, Longbin
    OCEAN ENGINEERING, 2020, 196
  • [49] Shape optimization of coronary stents based on Finite Element Analysis
    Lebaal, N.
    Azaouzi, M.
    Roth, S.
    COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 2017, 20 : 119 - 120
  • [50] Knowledge Driven Optimization and Finite Element Analysis of Aircraft Structures
    Curran, R.
    Gomis, G.
    Murphy, A.
    Castagne, S.
    Morenton, P.
    Rothwell, A.
    LEADING THE WEB IN CONCURRENT ENGINEERING: NEXT GENERATION CONCURRENT ENGINEERING, 2006, 143 : 643 - 662