EFFECT OF STYRENE-BUTADIENE ON RHEOLOGICAL PROPERTIES OF ASPHALT EMULSION

被引：0

作者：

Warid, M. Naqiuddin M. ^{[1
]}

Hainin, Mohd Rosli ^{[1
]}

Yaacob, Haryati ^{[1
]}

Aziz, Md. Maniruzzaman A. ^{[1
]}

Idham, Mohd Khairul ^{[1
]}

Raman, Noor Azah Abdul ^{[1
]}

Mamat, Rosmawati ^{[1
]}

机构：

[1] Univ Teknol Malaysia, Fac Civil Engn, Dept Geotech & Transportat, Utm Johor Bahru 81310, Johar, Malaysia

来源：

JURNAL TEKNOLOGI | 2015年 / 77卷 / 23期

关键词：

styrene-butadiene rubber; slow setting emulsion; rheology properties; cold mix asphalt;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

One of the main issues with cold mix asphalt (CMA) mixtures is having poor abrasion resistance with low cohesion, longer curing time and low elasticity. SBR is used to improve the rheological properties of the asphalt emulsion. This paper evaluates the effect of using different percentages of SBR in unaged slow-setting emulsion (SS-1K) in CMA. These modified emulsions were blended at various percentages, i.e. 2%, 4%, 6%, 8% and 10% of the weight of asphalt emulsion. The investigation focused on the rheological aspect which correlates the properties of unaged modified asphalt emulsion with its performance. Dynamic Shear Rheometer test (DSR) was used to measure the parameters of complex shear modulus, G* and phase angle, delta of the asphalt samples. Based on the results, it shows that by adding SBR in the asphalt emulsion improve the rutting resistance. From the isochronal curve, the complex modulus, G* of the modified emulsions was found higher than the unmodified emulsion. The modified emulsions show signs of improvement in binder properties in terms of elastic deformation and viscosity reduction. Therefore, it can be concluded that the SBR could improve the performance of the asphalt emulsion used in CMA.

引用

页码：1 / 5

页数：5

共 20 条

[1] Investigation into hot-mix asphalt moisture-induced damage under tropical climatic conditions [J].

Ahmad, Juraidah ;

Yusoff, Nur Izzi Md. ;

Hainin, Mohd Rosli ;

Abd Rahman, Mohd Yusof ;

Hossain, Mustaque .

CONSTRUCTION AND BUILDING MATERIALS, 2014, 50 :567-576

[2] Styrene butadiene styrene polymer modification of road bitumens [J].

Airey, GD .

JOURNAL OF MATERIALS SCIENCE, 2004, 39 (03) :951-959

[3] Rheological properties of styrene butadiene styrene polymer modified road bitumens [J].

Airey, GD .

FUEL, 2003, 82 (14) :1709-1719

[4] Rheological evaluation of ethylene vinyl acetate polymer modified bitumens [J].

Airey, GD .

CONSTRUCTION AND BUILDING MATERIALS, 2002, 16 (08) :473-487

[5]

Bahia HU, 1994, ASPHALT PAVING TECHN, V63, P414

[6]

Chang F.-L., 2013, J TEKNOL SCI ENG, V3, P97, DOI 10.11113/jt.v65.2153.

[7]

Johnston J., 2009, POLYM MODIFIED ASPHA

[8]

Kamaruddin N. H. M., 2014, ADV MAT RES, V911, P405

[9] Characterization of warm mix asphalt binders containing artificially long-term aged binders [J].

Lee, Soon-Jae ;

Amirkhanian, Serji N. ;

Park, Nam-Won ;

Kim, Kwang W. .

CONSTRUCTION AND BUILDING MATERIALS, 2009, 23 (06) :2371-2379

[10] Rheological characterization of styrene-butadiene-styrene copolymer modified bitumens [J].

Lu, X ;

Isacsson, U .

CONSTRUCTION AND BUILDING MATERIALS, 1997, 11 (01) :23-32

← 1 2 →