CREEP DEFORMATION OF DUCTILE 2-PHASE ALLOYS

A continuum mechanics model is developed to explain the creep deformation of ductile two-phase alloys. The model predicts that the transient creep is caused by the internal stresses in second phase and matrix resulting from the difference in creep strain between two phases induced by the strength difference, even if the inherent transient creep in both phases is not taken into account. The difference in creep strain between two phases in steady-state creep is analytically obtained for the alloys in which both second phase and matrix exhibit the exponential law, the power-law or the hyperbolic sine law creep. The continuum mechanics model gives the same values of steady-state creep rate as the constant creep rate model by McDanels and co-workers. The results of analysis based on the continuum mechanics model are compared with the experimental results.